Luxman 3045 mb


I have these wonderful Tim deParavincini designed amps from I believe the early 70's. Anyone out there have experience with upgrading, moding, servicing. I switched to KT 88 output tubes 10 years ago.
128x128shussbliss
It is an excellent design. Upgrading the coupling capacitors, feedback loop capacitors and the resistors (plate, cathode, grid stopper and feedback) brings them up to the level of anything you can buy today in that poower range.
I had two pairs of them around 1981. The only thing I hated about them was the old fashioned screw strip for speaker wires. I even bought some new ones but the guy I took it to insisted there wasn't room to install them. I am not sure in retrospect that he knew what he was doing. The old Lux units like the CL 35 and CL 32 were good and can be made better with new parts, but you knew that.
The Luxman 3045B is outstanding. Aside from the usual periodic maintenance (re-caps, resistors, etc.) the circuit is sound. I used these for a couple of decades with a stash of the original high power triode tube.

With this amp, you're pretty much at the limit of push-pull sound. The transformers are beyond reproach. Instead of trying to make the Luxmans something they aren't (you're already a half-step back by the conversion to KT88s), accept your amps are sensational and consider your next step moving to an 845 SET or P-SET 300B amplification.

Phil
I had eight of these in the late 70s. Aside from the output tube becoming unavailable, by biggest problem was setting the bias. Each night all eight had to be biased and this needed to be repeated during an evening of listening. I did not have them or the Fulton Premieres for very long, largely because of this, but I did like the sound of these amps.
Thanks all. I do not have any technical experience with amps although I can and have replaced components. Can anyone explain to me how to find the items you mention: feedback loop resistors and capacitors; plate, grid, cathode, feedback resistors, and others. I have the circuit diagram with all labels and voltages, but I don't know which components are the above mentioned items. Many thanks again, I would love to keep these amps!