Tube-amp for Magnepan?


Hi.I have currently tested Audio Research VT60 with my old Maggies (MG2A),
It seems that the 50w is too weak in power.I experienced a lot of distortion already at "10 oclock"-position on the preamp.(could there be something wrong with the tubes?) At low volumes it sounded fantastic!
The 4ohm connection was a lot worse than 8ohm.The Maggies are 6 ohms...
A friend suggested either a VT100 from AR or maybye Mcintosh 275.The latter is more in my budget..I currenty run a Papworth MIA200 ,200W solid state-quite good but a bit boring.I really want to test out tubes!Have anyone any recomandations?
efuglset
I heard the 1.6 at a local dealer, which were fed by some nice McIntosh amps. They sounded fine, nothing offended there. So it must be possible, at least. Of course price is a consideration there.

There is also the tube-SS hybrid option. You get tubes in the input stage and SS output stage. and lots of watts.

Van Alstine, Moscode, Alta Vista are some sample brands, roughly in ascending order wrt price.
I have tried Cary V12, Music Reference RM200, two Conrad Johnson Premier 11, and ARC VT100 to name a few during my maggie days. It works fine but bass is not its strong suit. Well, in maggie land, 50 hz is called "deep bass" anyway so it might work for you.

To me, there is no comparison using SS amps on maggies! I had good luck with Odyssey monos, Threshold S-500 x2, and even PWM amp like the ICE H2O. Also tried Levinson and sounds great, although I only had brief expereience with the ML's.

I guess you can try OTL and see how it sounds. The only downside, to me, is when it's time to replace tubes (there's plenty of them on it!). I always wonder how long the tubes will last on OTL amps driving planars or electrostatics.... not that I want to see for myself, just curious.
Magnaplanar is 30 minutes from our front door. Over the last 30 years we've had a lot of experience with them. In fact, our first prototypes were used immediately on Maggies as that was one of the speakers we were using for reference (Tympani 1Us -that was a long time ago...). Jim Winey has made a point of telling me a number of times that the best he ever heard one of their speakers (MG-20) was with our MA-2s.

I've seen people with our amps have the tubes last a long time. One guy here in town has had the same set for the last 8 years. If using M-60s, most everyone also uses a set of ZEROs. The amps then make 80 watts and run cooler, with greater authority and transparency, and the tubes last longer too.

Its true that if you put a powerhouse 600 watt amp on a speaker like this it will play a little louder, but you will find that at higher volumes the dynamics are compressed due to the phenomena I mentioned earlier. BTW this is not true of the push-pull speakers! I regard the 20.1 as one of the better bargains in high end audio, but this thread is with specific regard to the MG-2.
I forgot to add that i run a 2-sub system with a sold state 200w amp for bass. My Maggies always needed some help in the low end and this realy works fine.
How far is Bryston from Bear Lake? Seems like Magnepan feels proximity is not as important to them as the amps that match the best.

I have heard the IIIa's many time with high powered SS amps, and they act very much like my 3.6r's do, they open up and sing, and the bass goes much lower.

I know you sell tube gear, but I disagree with your plug for your gear.