2. amps-preamps
  3. 1289755209

Amps for Sonus Faber Stradivari Homage

I have a pair of Stradivaris that I love, but I´m having a little trouble finding the right amps for them. My system consists of: Emmlabs CDSA SE latest version, Clearaudio Champion Level two/ SME V/ Benz Ruby, ARC REF3, MSB 202 monos.
I have driven the speakers with a set of Pass XA 100.5 before, but they sounded compresed quite quickly. The MSB´s offer more power than the 100.5´s and sound more detailed and airy, but also leaner and brighter.
I love detail and air, but I also crawe bass slam and body in the midths and highs. I absolutly hate lean and bright sound, no matter how detailed it might bee.
I have owned quite a lot of Krell gear in the past. I liked the bass of the ols stuf like the KSA s series + the first FPB stuff. The rest of the frequency range however, sounded rough and "solid state" to me. I liked the detail of the MCX 450´s, but they sounded to lean in the low frequences to me. I have tried tube amps as well, but I have not yet found a pair that did´nt sound like tubes in the bass region
So I am dreaming of a set of amps that delivers a full bodied, warm but detailed sound with bass slam and bass detail as well.
Any recomendations ?
NB: English is not my native language, so I hope for your understanding if my spelling is off !
0461
syntax's avatar
syntax
2,193 posts
 
Jadis is a good idea, can can listen to them naked...pure tone will touch your skin :-) another excellent sounding amps are the old Jeff Rowland Model 8 and 9
0461 OP
18 posts
 
Some feedback !

I haven´t been able to locate a set of JA 200´s at a reasonable price, but I have a set of Mc Intosh Mc 501 on hand, and I think I will give them a go. Low detail lewel or not... After doing a lot of surfing, it seems clear that quite a few Stradivari owners prefer the "dark" Mc Intosh sound paired with the strads..
lloydelee21
1,202 posts
 
Hi 0461,

Good luck with that. i have never heard Macs with Strads before, but i totally agree there are many satisfied owners of such combinations. Further, if you read the Roy Gregory review(i think it was him...i have read them all before buying the strads years ago), and you also look at many of the Strad-based systems out there...you will also note that many of them use Nordost Valhalla cabling somewhere in teh system. Roy Greogry i think mentioned that rather than go with a heavy SS amp (which he did not find synergistic at all)...he preferred to "liven up" the Strads thru cabling instead. I think he had Nordost Valhalla. I myself used Transparent Reference...but found profound improvements using Nordost Thor power conditioner for my entire front-end (and it is wired with Valhalla).

Good luck and pls continue to post.
0461 OP
18 posts
 
Hi again,

The quest for new amps pointed me in the direction of McIntoch as allready mentioned. The guy who wanted to sell his 501´s also has a set of almost new 1,2kw, and we are now "negotiating" the price for them. If we can come to an agreement, I would prefer to get them ower the 501´s. Primerly because they are more "top of the line", and I admit to beeing prone to top of the line gear. Also when there is no reason other than the emotional one. It´s like with cars.. I´d rather have the Audi RS6 opposed to the S6 even though I will never really take advantage of the surplus power.... if you know what I mean..
cmalak
681 posts
 
0461...that's great that you have narrowed it down to the MC501 and MC1.2KW but unfortunately they will both not fit that well with your ARC Ref 3. There is a potential impedance mismatch and the place where it will be most apparent is in the bass fequencies, where the Ref 3 has an output impedance above a 1000 ohms. The input impedance of the MC1.2KW is 10Kohms (which gives you less than the minimum 10:1 and certainly less than the often desired 15:1 or 20:1 ratio between the amp's input impedance to the pre's output impedance. The Ref 3's overall output impedance of 600ohms balanced and 300ohms through single-ended connections will barely get you there in terms of the desired ratios but as I said in the important bass region the Ref 3's output impedance goes above 1000ohms. This will cause attenuated and loose bass performance most likely and will therefore muddy up the overall resolution and thicken the sound.

If you look at ARC's power amps (both SS and tube) they are all above 100K ohms in terms of input impedance. So you may have to find a low output impedance preamp to match with your McIntosh SS amps, maybe 1 of their own preamps like the C500T.

Good luck.
More to discover