Please recommend components for newbie with $1K


I currently have a late-90's Sony cd player, a pair of old Realistic speakers that are hand-me-downs from my father-in-law, and a Scott 418-A integrated from the mid-70's (I think) that I acquired at a pawn shop when I was an undergrad. Sounds pretty bad, so I want to upgrade. I can put in $1000 now, so I want to get speakers and an integrated amp or a receiver. I guess that gives me around $500 for each. I need the amp to have A/B speaker switching. A phono stage would be nice too, although I'm not opposed to getting a separate phono preamp in the future if necessary. This system will be a smallish room, about 14x10, 8' ceilings.

Unless I can find something used, I'm leaning toward the Marantz PM7200 integrated. Local shops have also suggested the Integra DTM 5.3 receiver. I would buy the NAD 720BEE today but it's $540 before tax.

Thanks for reading. Any amp and speaker recommendations will be greatly appreciated.
reanalyst
NAD C720BEE + NHT SB3= 1,200 retail.
Most dealers can put this together for about 1K and throw in cheap wire (14/2 or the like).
This way you get a warranty (digital volume control on receiver-all things digital can poop out for no apparent reason).
NHT SB3 gives lotsa-bass for a bookshelf speaker, very durrable, and sounds like a $1,000 speaker.

Good luck!
Reanalyst,

About monitors vs. Full range:

Generally speaking, monitors are "bookshelf" sized speakers. Many people refrain from calling them bookself speakers because they tend to sound bad if actually placed on a bookself. If you want good sound and plan to use a bookshelf sized speaker, they would likely need to be placed on a pair of quality stands to sound their best. Quality stands cost >$100-$300+.

Floorstanding speakers stand a better chance of being a more full range speaker. It is generally easier and cheaper to make a bigger speaker produce more bass volume and reach lower notes.

So, it is going to depend on your listening environment. If you need to place your speakers on existing furniture/shelves, you will likely need a bookshelf/monitor speaker. If you have room to place the speakers on the floor, I would suggest going with a smallish floorstanding speaker. It will be less expensive than buying a quality monitor/stand combination.

I would still hardily suggest the Wharfdale Diamond 8.3 that I mentioned earlier. It is a small floorstander, goes down to about 40hz and is on sale for $199 at AudioAdvisor. It will be new, with full warranty and AA has a great return policy. You can't lose!

The earlier suggestion of an Arcam Alpha 10 is also a good one. I previously owned one and it was a great piece. It has multiple speaker outputs and a nice remote. It also has plenty of power for the Wharfdales. There is an available phono card that plugs right into the Alpha 10, but you may have a difficult time finding one. I would check with Audiophile Systems Limited, the US distributor.

So, you could get the Wharfdales, the Arcam Alpha 10 and a pair of Paul Speltz Anti-Cables speaker cables and be set. You would also be well within your budget with money left over for more music or a phono section. With this system and your musical taste, you would likely not need or even want a sub in a room the size of yours.

$199 Wharfdale Diamond 8.3 (Maple)
$500 Arcam Alpha 10 Integrated amp
$60 Paul Speltz Anti-Cables
_______
$760!!!!!!

Enjoy,

TIC
Reubent,
Thanks for the input. Your comments on speakers are right in line with what I have been thinking. I would prefer a full range speaker. I have been considering the cost of stands when looking at smaller speakers & am finding it difficult to locate small floorstanding models to audition. It seems the stores in my area (Raleigh, NC) carry only bookshelf or monitor sizes in my price range. I wanted to hear the Paradigm Esprit ($429), but the local Paradigm dealers don't have it. I also am curious about the Axiom M40ti ($504 for 2nds). There is a Wharfedale dealer in town, so I will see if they have some 8.3s I can listen to.

I'm curious, though; the Wharfedales are listed as having 6 ohm nominal impedance and sensitivity of 86. My understanding is that that speaker would require a lot of power at that sensitivity and the 6 ohm impedance would call for even more. Would a 100 watt amp be able to drive a pair of 8.3s and another pair of speakers?
The Wharfdale's are listed as 100watt max power handling, so I think a 100 watt/channel amp would be plenty.

Also, try to hear the Wharfdales locally, if possible, but you could also just order them from AudioAdvisor. But don't wait too long. These speakers list for $499, so the $199 price for the maple finished pair is a great deal. If you don't like them, send them back within 30 days. AudioAdvisor has an excellent return policy. Most people can't get to a dealer to hear all of the products that interest them. Feel free to take advantage of AudioAdvisors sales philosophy. They sell to people everywhere, therefore they have to have a good return policy. People weould never plop down big-bucks to buy stuff that they never heard unless thay had the ability to return it.

Enjoy,

TIC
A lower sensitivity spk. will require more power to sound as loud as a spk. w/higher sensitivity. 86dB vs. 89dB, twice as much power for the 86dB spk. to sound as lond as the spk. rated for 89dB. However, these are only numbers which may or may not be an accurate figure. Also, these figures tend to be higher when the spk. is placed in a room. Bookshelf spks. are generally less sensivity than floorstanders. Sealed design less sensitive than one which is ported. The Arcam is rated 170w @ 4ohm I believe. Not too int. amps will drive a lower ohm spk. unless you spend much more. Considering your budget the Arcam would be a fine choice. Regarding last question, it would depend on the spk. Another 6ohm spk. would drop the impedance to 3ohm. I'd bet the Arcam could handle this but you might want to contact the Arcam. Also, the impedance curve of a spk. is not constant figure. It varies all over the frequency range. Hope this helps. Bill