New Dedicated Audio Room


I am in the initial stages of buying and building a new home. This home is going to have a dedicated audio room. (Approx 18'x 26') I will be working with the builders regarding the room and want to hear some suggestions regarding sonic improvements. I plan on using Hubbell outlets with 4 dedicated AC lines. I am also going to have the builders use thicker sheet rock for the walls and ceilings. Any other suggestions??
marcy
look at www.tubetrap.com for some suggestions. they've got a number of products designed for both constuction and treatment of sound rooms. tubegroover has some good points but you may have resale problems if you carry things too far (if that's a concern). i would go for 10 ft. ceilings and, at the very least, double wall (with airspace) constuction. some of the best spaces i've listened in were made of large mass walls, stone or double brick, etc. don't forget about controlling the sound of your hvac and NEVER install low-voltage halogon fixtures or lamps within 50 feet of your room.
I would go with at least 8 dedicated lines.You want to keep every piece of equipment on its own circuit.2 for amps 1 pre amp 1 cd player 1 turntable, 1 self powered sub.you get the picture.Use the hubbels and make sure you use a good power wire.at least 14AWG teflon dialectric with individual shielding and a overall shield.put in a cathedral ceiling if you can.I moved from a 18' long 16' wide by 8' high room to one that is 18'wide 15'long by 10'on one end to 18' on the high end.The difference in sound was incredible.I could have spent 5/10k more in the other room and not achived the same sound upgrade.Dont dampen it to much.Tube traps in the 4 corners and a little on the walls.
The suggestion to check the TubeTraps web site was a good one, since they have a constrained layer system for use with sheetrock that is very good. You can also use a material called "DexDamp" which is cheaper, using a half-sheet every several feet between two layers of sheetrock. I have purchased quite a bit of acoustic treatment material from a marine supply outlet here in Seattle. They sell "DexDamp" sheets, as well as a material called "Sonolead", which is a 2" blanket of acoustic fiberglass with a heavy vinyl septum in the middle. The "Sonolead" can be used in the ceiling, or mounted to sections of peg board to make excellent baffles. The also have several different types of acoustic foam. HamiltonJet ships around the world, so you'll have no problem getting what you want. The web site address is: www.hamiltonjet.com
I prefer splayed wood panels for walls and some splaying on the ceiling. I have also heard good results with adjustable hinged panels on the walls instead of splaying. I wouldn't spend too much up front on acoustic treatments because you need to consider the room as a component of your system. Since the room is the most tuneable component, you should spend most of your time afterwards and tune the room to integrate best with the other components. I prefer relatively inexpensive hospital grade power conditioning to any audiophile conditioners. These completely regenerate your power to make up for any bad power coming into your house.