Bryston 28bsst2 worthy upgrade from a krell fpb70?

Hi Lecram,

I had my 2 FPB 350 MCX recapped for $750/amp if I recall correctly. I've opened up the Krells a few times and I would only give that job to Krell factory and nobody else. There is a lot of boards to be taken apart and once caps are replaced, there is probably a few DC bias adjustments to be done. If the tech you know did local Krell repairs, you migth want to contact him to see what is exactly involved.

So if the 4 BssT2 did not sound as good as your Krell FPB 700, I would like to think that the 28 Bsst2 would best the 4 Bsst2, but by how much? Would also think that the Bryston house sound would also be kept in the 28 Bsst2...Would the 28 Bsst2 be better than your Krell? That is the question...

Audiolabyrinth,

I've just ordered my SR Red fuses for my Krell monoblocks. Will take 2 weeks to come in. Will keep you posted on the results.

Hi Lecram, there is some up-grades you can do your self, warning, takes 700hrs to full burn-in, however, you will be shocked at the out come, it is a must for you to get the Furutech GTX-D Rhodium outlets on your entire system, and get the furutech FI-50 Rhodium power cord plug for the Krell and plug it into the furutech GTX-D rhodium outlet, wala, magic man!!!!!!, you will hear a substantial improvement at 250 hrs out of the 700 hrs, get back to me on the cable thread, Tara Labs cables if you do this huge on the cheap up-grade, it's like a componet change, brings the best out of krell for sure, cheers.

Hi Lecram, I took a peek at the Bryston 28B sst2 mono blocks, the noise floor is right below 115db, and the transformers for the power supply is a mere 2,000 kva in each amp, the stock form krell 700cx has two 4,000 kva transformers in the power supply that is a total of 8,000 kva, and the stock form noise floor to the 700cx is 120db, so no, I do not believe spending nearly $20,000.00 on these amp's are worth it period, really, your 700cx will out perform most amp's in the $20,000.00 class range anyway,The 700cx is class A, and the Bryston is class a/b, also, the bryston does 1,000 watts, the 700 cx will do 1,800 watts a channel to your speakers on a 2ohm load, krell did us all a favor on the original price for the 700cx, a bargain for real, they could have got alot more money for these amp's compaired to what is available today.

01-03-15: Audiolabyrinth
Hi Lecram, I took a peek at the Bryston 28B sst2 mono blocks, the noise floor is right below 115db, and the transformers for the power supply is a mere 2,000 kva in each amp, the stock form krell 700cx has two 4,000 kva transformers in the power supply that is a total of 8,000 kva, and the stock form noise floor to the 700cx is 120db, so no, I do not believe spending nearly $20,000.00 on these amp's are worth it period, really, your 700cx will out perform most amp's in the $20,000.00 class range anyway,The 700cx is class A, and the Bryston is class a/b, also, the bryston does 1,000 watts, the 700 cx will do 1,800 watts a channel to your speakers on a 2ohm load, krell did us all a favor on the original price for the 700cx, a bargain for real, they could have got alot more money for these amp's compaired to what is available today.

But which one SOUNDS better? Are you familiar with the Bryston?