Gilmore Audio planars revealed

Your questions seem to be mostly in the form of statements, most of which are somewhat off the mark. Let me begin.

What makes you think that in order to be a "line source" that something needs to go from "floor to ceiling". What home speaker that claims to be a line source goes from floor to ceiling? If you want to see some examples of how folks create line sources in the pro audio world for live sound, go to www.meyersound.com. A line source in one sense is anything that is greater than a point source. But you are chastising us for something that we do better than any other ribbon based planar that we know of -- so your complaint is hard to answer. This is quite true of your other comments. But I will try to proceed one by one.

Vertical dispersion starts at 60 and 40 inches respectively and horizontal dispersion is 60 degrees.

If I am a reasonable distance back from the spekaer, I get a very full soundstage from the model 3. The sound doesn't truncate somehow above 40 inches --why would it?

We tilt the speakers back to increase disperson slightly but mainly so the speaker doesn't fall over -- and thus for aesthetics -- this way we can have a cute stand in the back instead of clunky feet on the front and back.

Whatever comb filtering effect is created by our topology, it is less than anyone elses -- not more because of it.

I want to clarify something with Mark concerning the doppler distortion and I will get back to you. I know that it is not a factor and I want to confirm that my understanding as to why is correct.

There are binding posts on the woofers (we are using Cardas) and if you are not seeing them, it is because of the perspective of the shot. The crossover is in a separate box that weighs sixty pounds and rests on the floor behind the speker. We are thinking about having a see through top so you can enjoy the view -- its quite impressive.

I agree with your statement that "I guess the proof will be in the listening."

Concerning the "center channel" and Mark's purported relationship to her:
No, its not Mrs. Gilmore. Mrs. Gilmore is 6'4" tall, weighs 300 pounds and has killed both of her former husbands with her bare hands for their indiscretions. Consequently, Mark has had incentive to concentrate on audio research and development and not stray or be distracted. As a result, marital bliss and his personal well-being have been sustained and therefore he has a lot to smile about. The woman in the picture is an alien from the planet Xenon. She is the latest version of their Humanoid Replications Program HRP. Given the advanced technological sophistication of her alien society, she has been an invaluable asset in helping Mark develop the special technology he is using in his speaker. As a token of appreciation, Mark has allowed her to participate in the photo shoot, thus helping her realize one of her lifetime dreams. It's nice to know that some alien societies share many of the same aspirations as us humans, thus providing a framework for cooperation and peace. These photos are as much a tribute to that cooperative spirit as they are a tribute to the fine example of advanced audio technology epitomized by the Gilmore Audio Model 2's and 3's.

Hope you found this helpful.

Hi Duke,

Since I was the first to fire a shot across your bow in this thread I now propose we simply allow you to show your wares at CES and other venues. I take no offense at your rebuttals while I still view the parsing of words such as "it's lighter than THE air it moves" akin to what the meaning of IS, is. I've repeatedly expressed that these may indeed be top drawer speakers, and we'll find out reasonably soon, which is good enough for me. What leaves me opened minded is Albert Porter being a Texas dealer. I doubt that Albert would be in this position unless someone who he respects a great deal made this recommendation, and Albert comes closer to soaring with eagles than hanging out with turkeys. I apologize if I've offended and wish for this thread to end on a happy note, urging all members to reserve judgement until we receive comments from trusted sources based on listening tests.

Most of the folks here would snicker at my modest two channel analog system until they heard it but few would question what I've built with my own two hands in my "street legal" race car. Having followed engine, chassis, power trasmission and traction progess since the mid 60's I've discovered that equipment manufacturers who use figures to lie also use partially clad, "fun bag" equipped models to avert the interested party's attention away from their outrageous claims. All of this may not apply to Gilmore speakers but simply be a poor marketing judgement call to folks like myself.

I trust that you are so close to and excited about this potentially great product that you don't understand our healthy skepticizm when faced with marketing statements that may push the envelope for credibility. That's how I'm reading your replies.

There isn't anywhere for this thread to go but way downhill from here unless we all back off a little, give everything the benefit of the doubt and reserve judgement. Since you have picked an especially powerful username I trust that you are hearing great things when auditioning this product.

Peace to all and especially you Duke. I know this hasn't been easy on you. I give you a lot of credit for taking the heat here. You've tried to explain each problem area. The only thing you have not addressed is price. How about a ball park figure here, say within $5,000?

Patrick

in this message you wrote "We are able to attain big excursions, cleanly -- plus or minus 2 inches!" but then in your latest message you say "One clarification: Total excursion is 2 inches or plus or minus 1 inch."

clarification?

then you launch an all out attack, calling him "silly" and demanding an apology. yeah.

i'm looking forward to your response to my post, mr. "integrity".

Two points:

1) Doppler distortion:
Re ribbon: Doppler distortion, which results in intermodulation distortion, doesn't really go into effect until around 180Hz. We crossover at 200Hz for that reason among others, so it is not a factor for the ribbon.
Re woofers: Yes, doppler distortion is a consideration, but there is minimal doppler distortion from our planar hybrid woofers because of the actual technology employed. This is linked to how the planar membrane itself is constructed and excited -- I can't say anything else because to do so would reveal proprietary intellectual property. Also, remember, any distortion is shared among 4 woofers -- overall distortion will be perceived as less for that reason vs a single driver topology. Finally, the fact that the woofer's excursion is 2 inches maximum doesn't mean that it is out there flapping around at the limit all the time, if ever. Most of the time, even at very impressive spl's with very demaning source material, the 4 woofers are cruising along at levels way below maximum performance levels, thanks to their synergistic design. At very high spl's, there is of course increased distortion, but the signal to noise ratio saves the day -- when the distortion is relatively high overall, it is still not relatively high compared to the signal. The Gilmore speakers, especially the model 2's, can play bass louder and cleaner than any other dipole or planar for sure and any home audio dynamic speakers we know of.

Concerning a forum participant's concerns that these speakers should not be called planars -- I think that the silliness of this perspective has already been pointed out by other forum participants. Let me add three other considerations. There is no box,the panel is flat and the radiating elements are all on the same plane -- thus the term planar.

Thanks again.

you wrote "Vertical dispersion starts at 60 and 40 inches respectively and horizontal dispersion is 60 degrees."

60 degrees horizontal for what frequencies? what vertical angle from the line perpendicular from the panel? in other words, how much above and below the top and bottom of the ribbon?

i'm sure mrs. gilmore appreciates the mention.