Absorption or diffusion????

I'm with Rd, "I've always heard absorb in front of you, diffuse behind you." Anything coming off the TV would probably be a bad sound, distortion. Best of luck Gsselling, acoustic treatment is always so site specific. Cheers!

You have a beautiful system. I love the look of those tylers. For a different take on the problem, I would suggest looking into getting a front projector for your room and have nothing in bewteen your mains. You mount a screen on the front wall and go from your 50" diagonal image to a 90" or 100" widescreen image instead. It is alot more fun and immersive with a big image and is also nice to retract the screen and it all goes away. It does not have to cost alot either and can be done quite well on less than $1500 bucks. It has worked quite nicely for me in my room.
peace

A quote from a smarter guy then me

"For someone with a very small budget, making the rear wall of a room totally dead may be the only solution. At least that gets rid of flutter echoes between the front and rear wall, though at the expense of sounding stuffy and unnatural. But it's better than the hollow boxy sound you get from a plain flat reflective surface. Another option is to make the rear wall of a room partially reflective and partially absorbent. You can do this by making the wall totally dead, and then covering it with thin vertical strips of wood to reflect some of the sound back into the room. If you vary the spacing from strip to strip a little, you'll reduce the coherence of the reflections a little which further improves the sound." - Ethan Winer

Either Absorption or Difussion should work. But I like Shiva's idea the best.

I vote on difusion. I'ts effective and easier to accomplish.
What do you want? A good spatial image, then your TV should not interfer in the sound field.
The problem with absortion is that it affects the character of the aural enviroment, changing the room frequency response. In most cases absortion turns the room acoustics dead, because it supresses echo (wich is good) and high frequencies (wich is bad). So, absortion is good to control room acoustics (primary), making it flat if desired. There are some physics and mathematical expressions that one must consider in order to make a good absorber at the desirred frequency range.
For me it looks like that you want the incident energy in the TV to be redirected so it wont affect the sound field prodiced by the speakers.
Scattering by arrays of elements is exploited in the design of broadband diffusors for auditoria and sound studios. Try build one to put in front of your TV.
Hope it helps.

Gsselling first thing I would do is to direct couple your TV to the surface it now rests on. I try to do this in most custom installs that I do.You need to do this as a base line before you try any other experiment . You have a giant resonator in your room that is out of control, no predictability as to what frequency it will store..how much and when.. it will be released only to mix with the mains. Direct coupling your tv will net two benefits. The picture will be better I have seen this benefit.The picture becomes sharper and color rendition is more accurate. Properly coupled to the support surface will allow the stored resonance generated by the projection set a place to dissapate to. Trying to isolate the tv from the room with rubber or foam will only make the problem worse..slowing down the release of stored energy. After the set is properly coupled then I would construct a panel framed with 1 by 2's lightly filled with long hair carded wool and covered with grill cloth. This panel could be made to be placed and then easily removed from in front of the tv. The wool is more linear and less likely to cause an AAAHHH sound or suckout of the midrange that man made fibers or foam do.Tom