Wilson Watt Puppy 7 Blowen tweeters?

Give him a break. Check w. your dealer. It should be a simple resistor switch. Fast & painless. You need to purchase the resistors from Wilson. If you really are blowing tweeters, I never have. I like to play loud. If I hear strain I turn it down.

In general, and there are always exceptions, tweeters are more apt to be blown by a combination of overloud playing from an underpowered amplifier; the amplifier being driven into clipping and it is the clipping that destroys the tweeter.

I own a pair of Sophia 2s. More than likely your tweeters are ok. There are resistors that protect all of the drivers in Wilson speakers. For the tweeter, the resistors are located on the bottom of the Watt underneath the access panel. You will need to call your local dealer, because these are very specific, and unfortunately expensive resistors. If you are under warranty, they should be covered.

Thanks A'b'guy,for helping get some of these responders straight. A bad tweeter on a Wilson speaker or on any speaker just isn't all that funny; if it happens to be 'your-speaker'. Guess there is no shortage of morons on the board here--?? I know, everybody has a different sense of humor and many of us have different capabilities in spelling but AUDIO should be the #1 focus here;belittling should come in at 1204 or thereabouts.