Sistrum under VonSchweikert VR-4JR

Also replace the stock feet( bottom unit) with the larger ones.Robert should know what sizes you need and they will improve over OEM because Starsound has propreitary brass formula.I think you will be pleasantly schocked-Dennis

Cenline,
I actually meant to use SP-004 under the bottom unit.
I have audiopoints on the bottom now.

Well
I don't know if that 004 would be enough and think that the sp-1 would be a more suitable canidate.I know the 004 would work between the monitor and sub and think that's the way to go.If you wanted to do the sp-1 on the bottom, this stand would have a much bigger footprint for the size of the speaker you have.The 004 wouldn't be large enough to fir properly.I just measured the sp-1 and they are too wide at 12inches,the good news is the sp101 will narrow down to 7inches at the back and do 13inches too the front.The 101 is a way better stand and also costs more but is the one that is more suited for the job( plus it looks real cool !).I hope this helps and go big or just keep listening Dennis

I thought so, SP-1 is too wide, and 101 is too expensive for now (it's half of my speakers full retail), but it could be a next step, if I like Sistrum enough.
Theaudiotweak,
I did contact Lrsky, and he vouched for Sistrum and Microbearing Steel fill instead of sand, or lead for the speakers

Could you take the bottum stand (plinth) off of the VR4jr's and add a Sistum system directly to the very bottum of the speaker? Maybe the sp-004 would fit without the plinth there?