YG Acoustic Kipods

Heard this Kipod at the recent Rocky Mountain Audio Show 2007, suffice to say that for $40k/pair, it has some very serious competitors.

I am considering the YG acoustics line (either Reference Studio or Kipod) for my new listening room. Thanks to all who have posted here-- very helpful. Was curious with the active speakers needing direct interconnect, how do most of you have setup? Do you run 2 interconnects per channel from your preamp (i.e., one for the amp to drive the passive portion of the YGs, and one directly to the subwoofer portion of the YGs)? Or, do you split the interconnect signal from the preamp? My pre has both XLR and RCA outs which I could use both to cable the YGs.

Just curious as I haven't had experience with (partially) active speakers.

Vjayh, It occurs to me that I may not have worded my reply to you as clearly as I might. When I talk about "one interconnect per channel from each speaker," I am talking about the subwoofer drivers. You need one interconnect cable for each subwoofer. The upper modules, which contain the tweeters and mid-woofers, are connected in the usual way -- that is, a pair of speaker cables from each upper module to the amp. So each channel of the tweeter-mid-woofers reuires a pair of speaker cables, and each subwoofer channel (each lower module) requires one interconnect cable, to connect your preamp to the dedicated subwoofer amp that is in the lower module. Sorry if I wasn't clear enough in my first posting.

If I may simplify even further, each Kipod active system requires one speaker cable for the passive upper module, and one single-ended interconnect and one power cord for the active lower module.

Don't forget the need for PCs with active subwoofers.

Unless of course you so choose.