In-line xover question

I guess what I am referring to is a "passive high-pass RCA type plug-in filter".

Kr4-Looks like Parts Express handles Harriosn Labs. Do you have experience you can share? Thanks for the help.

Bryston 10B, Marchand, Pass Labs (hard to find used).

A plug-in high-pass filter like you describe will roll off the bottom end of your main speakers at 6 dB per octave (it's a capacitor selected with the amplifier's input impedance and desired rolloff point in mind).

Whether or not it will help get a better blend with your subwoofers, I can't predict from here.

Are you already using some sort of high-pass filter on your main speakers?

Are your main speakers sealed or vented (makes a difference in how rapid their inherent rolloff is)?

How steep is the low-pass filter on your subwoofer?

What ballpark crossover frequency are you using?

Thanks.

Duke
dealer/manufacturer

Audiokinesis-
Thanks for taking the time to respond to my post. Guess I opened a can of worms. I'll try to answer your questions best I can. This experiment came about when I installed a pair of in-line filters I had on hand which xover at 65hz. After a few minutes ajdusting the low pass on my subs (which only go down to 40hz), I was relatively pleased by the results (which cleaned up the bass quite a bit) and now assume I can do even better. My main speakers are front vented (VSA 4JR) and I run a pair of old Velodyne HGS-10 subs crossed over at 40hz (I do not know how steep the low pass filter is on the subs-are you referring to slope?). The NHT X2 filter Bob-reynolds (thank you) suggested is intriquing as well.