Totem model 1 signature or Dynaudio 52

it all depends on the size of your room. if you have a 13 x 13 x 8 ft room, a pair of mani's would generate enough bass. if you are talkng about a 13 x 24ft room, then you will need a sub. there is plenty of bass but the room will dictate how it will perform. as for subs, i used the rel with my model 1's and didn't use a crossover for the speakers, i let them run full range (as i do my mani's) and i used a 50hz crossover on the sub.
as for your arc driving the mani's, especially if you want a solid bottom end sound, it is too small. i had a 100 watt mcintosh amp hooked up to both my model 1's when i had them and then the mani's and it was not a good fit. my 200 watt classe does a very good job with the mani's and more would even be better. the other option is to use a sub and crossover at 40 or 50hz at the mani's so your amp doesn't need all that power to drive the woofers.
good luck!

My 2 cents. I compared to Totem model 1 Signatures with Dynaudio Focus 110 (which i think is similar to 52 or 52SE). Totem was so much better.

Thanks everybody. That settles it in favour of the Totems. I'll try out room placement alterations to get better bass; the subwoofer may just be a little too much for my room. Remarkable what Totem does with components sourced from outside - bring in a Dynaudio midrange/bass and a Seas tweeter, and make a better speaker.

I am listening to a pair of Model 1 now and was curious if the Signatures would give an "appreciable" difference compared to the older version. The bass evidently does not go low but overall the mids and highs are pretty good. Coherency, imaging and musicality are above average for this small little speaker.

Any advice on the comparison between the Model 1 and Model 1 Signature would be appreciated.