speaker recommendation 2500 or less small room

New pair of SP Technology Timepiece Minis. You probably won't need a sub.

You must look at the Mirage Omnisat v2 FS (floorstander) at $1K plus perhaps the Prestige S8 sub to flesh out the bottom octave. I've lived with the first-gen Omnisat satellites for 3-1/2 years, and they make the entire listening space a sweet spot. You still get decent imaging and soundstage depth if you have to put them against the wall. I know, because sometimes I wall-mounted my satellites and they still sounded room-filling and engaging without suckouts or hot spots.

Although the FS model is floorstanding, they occupy less space than most minimonitors on stands. They're 40" tall, but only 5.5"w x 5.9"d. It has an 8"x8", rather thick glass bottom plate with feet or cones to provide a wider, more stable platform. The enclosure is made of thick extruded aluminum, and is as free of boxy resonance as a panel speaker. It's sensitivity rating is 93dB at 1w input, yet can handle up to 175w, so it doesn't take much to drive it and it can play loud. The omnidirectional pattern energizes the entire room, imparting the feel of live music, and makes the entire room the sweet spot just as you get with a live performance. Even if you're sitting to the left of the left speaker, you will still hear the entire L-R stereo image.

The FS extends down to 55 Hz. If you want that last octave, add their very compact Prestige S8, which is about a 1' cube and goes down to the mid-20s.

One more thing: Even though they're $1K/pair, the Omnisat v2 FS is competitive with your max budget; these things do great image presentation spiced by excellent clarity, inner detail, pacing, and air.

First I would like to thank everyone for there response. Secondly, I would like to know what to expect from an upgrade to the pre amp. And sense I am using a Mc solid state, would I be better off choosing a tube or solid state. Will a smaller speaker sound better at lower volume than a very large speaker.

Bulkley

Please explain "This is a big part of the problem; often voltages are mismatched between pre-amp and amplifier and no synergy."

Also the amp is new so it will not be replaced for a long time to come.

Hi, sorry for not explaining more and on my part. Sometimes when the input sensitivity between amp and pre-amp is not equal the products won't act in sync.

I have a friend who purchased and tried several pre-amps with his modified ss amps. I was wondering why when he tried Edge, Linear, my previous Bel Canto Pre3 pre-amp he was not getting the results he wanted. I felt for him and told him what I was thinking and he later found something; however he almost gave up in anger and frustration not to mention a shit load of money and time.

Often matching manufacturers pre & power eliminates these issues and then there are other times you will find a manufactures equipment will blend equally, as well, with others, as with it's own. Check the voltage between the two if your not getting the desired result.

One more example: Reviewer recommends product "A" that works with his equipment and he is in awe of the experience.
Person can't listen to that item anywhere around him so he purchases it. He get item "A" shipped to him plugs it in with his gear; not impressed. Gives item "A" some break in ; still no fire works! Panick and buyers remorse settles in and makes a couple calls and listens, yet same results. This is a lot more common than you think and is system matching; avoid the marry-go-round.

This was mentioned in the best interest of not falling into this senario. Some extra ammunition in case some thing comes up.

Cheers,

Keith