2. speakers
  3. 1223645084

NHT 3.3 with SA3 Amps????

I have been driving a pair of NHT 3.3 with a pair of NHT SA3 amps on the subs and a 5 channel amp on the upper speakers and center , rears. I just purchased a Proceed Processor, it only has one sub output.
I have two options;
1. Use an RCA splitter on the sub output
2. Use the built in x-overs in the SA3 Amps

OPINIONS????
128x128gbryant
viggen
838 posts
 
Is the Proceed a discrete digital audio processor such as Dolby Digital? If so, do use the Proceed's sub output. If not, use the built in cross overs on the amps.
robr45's avatar
robr45
319 posts
 
If it is the AVP it can support dual subs with the latest software.
gbryant's avatar
gbryant OP
83 posts
 
Thanks, I'm trying to locate the software upgrade website... do you have it?
cytocycle
1,043 posts
 
RCA splitter and let the processor do the crossover at 100hz if I remember correctly. I used an EAD Signature with my NHT 3.3's with a monosub signal. Bi-amping those speakers really wakes them up. Using an EAD Powermaster 2000 with 500watts to the top and bottom on each side is really impressive.
More to discover