2. amps-preamps
  3. 1428160381

Clayton Audio Class A amps. Need amp advice

Hi Guys,

I am looking to change my amps and for a few reasons.

First because I just upgraded my DAC from the great PS Audio DirectStream to the incredible Bricasti M1 DSD USB DAC. I love the Bricasti and it has shown that in my system it could offer me more with a more resolving and neutral amp IMO.

I am currently am using the wonderful sounding CJ Premier 12 mono tube amps. I love them and tubes in general but my speakers are the great Ascendo C8 Renaissance and look to present a somewhat benign load being 88 efficient and 6ohm but they are unique and have an internal firing 21 cm Kevlar Bass driver that is great but stubborn and the speakers I think will really shine with a iron fist control of that driver.

I love tubes, always have and always will but I grown tires of a flabby bottom which is exasperated by a unique and somewhat difficult to grip bass driver set up I spoke about above.

I want an amp that can give me as much tube sound as possible but with Grip and bottom end. I know this is a lot to ask for in the used $5k to $7k price range.

I have read and it seem like the Clayton offer exactly what I am looking for but wanted to hear from some of you guys if anyone has ever heard them or know of them or anything. Any info would really be appreciated. Here is the info on my speakers and I will also list the rest of my system in case you think that is helpful. Thanks

C8 Renaissance
Technical Data
Principle
• Three-Way with SASB bass unit (TOS Off)
(current damped outer driver with semi symmetrical band pass)
• Four-Way with SASB bass unit (TOS On)
Dimensions (W/H/D)
• 28 / 80 / 40 (without Base)
• 28 / 108 / 40 (with Base)
Weight
35 kg
Frequency Range
29 Hz (-3 dB) – 32.000 Hz
Power Rating
350 W Program (min)
Impedance
6 Ohm
Sensivity
88 dB / 1W/m
Outer Chassis (COAX)
• 25 mm Neodymium-fabric-tweeter
• 18 cm Woofer with XP cone
Inner Chassis
• 21 cm Chassis, Kevlar cone
TOS Chassis
• Ribbon-tweeter
TOS Function
• switchable (TOS Unit - Dipole AN / AUS)
Sockets
• Single / BiWiring Base
Dimensions (W/H/D)
28 / 18 / 40 cm
Weight
11 kg

Ascendo C-8 Renaissance Speakers (Germany) Speaker
Purist Audio Design Corvus Praesto Revision 2.5m Bi-Wire Speaker cable
Darwin TRUTH Pure Silver Reference 1 Meter RCA Interconnect
Darwin TRUTH Pure Silver Reference 1 Meter RCA Interconnect
Bricasti M1 USB / DSD / Volume Control DAC (New) DA converter
Tellurium Q BLACK DIAMOND Reference USB Cable
Decware ZSTAGE External Triode Output StageTelefunken ECC801S
Audio Research REFERENCE 1 MK II w/Rhodium IEC/NOS Tubes Tube preamp
PS Audio PowerPlant Premier AC Regenerator
Conrad Johnson Premier 12 Mono's 140 Watts Tung-Sol KT120's Tube amp
Salamander Amplifier Stands (2) Synergy System AV Furniture Stand
BMI Shark Jeweler Grade Platinum 9 AWG AC Power Cable
Mad Scientist PC-NEO with Power Purifier 11 AWG Power Cable
Sablon Audio Petite Corona 2.0M 7 AWG AC Power Cable
JPS Labs The Power AC+ 2M 8 AWG AC Power Cable
Synergistic Research Labs Tesla Series SE T1 AC Power Cable
Synergistic Research Labs Tesla Series T1 AC Power Cable
PS Audio Noise Harvester (5) Converts noise to light
OYAIDE RI Beryllium Power Outlets (2)
Blue Circle Audio The Yalu Balula Industrial Surge/Spike Protection
JPLAY v5.2 hi-end audio player turns PC into a digital transport.
Fidelizer Pro Version 6.1
JRiver Media Center 19 Music Software
128x128Ag insider logo xs@2xfsmithjack
zd542
5,339 posts
 
"That's what I thought about the Ayre Integrated but he swears its the best sounding amp under $20k bar none. He is so dead set serious on it."

People say a lot of things. If that were the case, then why does Ayre make amps that cost more than the one your friend has? Also, looking at some of the other recommendations, and your responses to them, you appear to be flying out of control here. Before you take anyone's advice, including mine, you need to do some listening before you buy anything. Otherwise, you'll just make a costly mistake.
fsmithjack's avatar
Ag insider logo xs@2x
fsmithjack OP
712 posts
 
Zd542

Flying out of control?? How do you come up with that. Who says that? I have it boiled down to 2 amps and am asking for other members opinions and if others offer new other ideas then great I would love to hear them.

I am buying used gear from people with mutiple trades involved that are over a 1000 miles away. Asking for advice I would think is a smart and controlled way of getting more information. I have already read everything available on both the amps and am hoping to reach out to the Agon gang to get some more info.

That would be great if I could just go to a dealer and listen and buy new amps like I am sure you are referring to but don't have that luxury. If I buy something and I hate it then I'll flip not a life or death deal either way but just trying to get some more info to make a better inform order decision. Everything I read about the Clayton says it is a uber powerful pure class a true top of the top ss amp that does more for a tube lover than any other ss out there. If that's the case that sign me up I'm in but the newer CJ are a the safer bet and nothing is free. I have found the bigger the risk to more opportunity for upside. My problem is a May dislike the class or the newer CJ is more of the same so asking for more info is what I am hoping for...
facten
2,876 posts
 
why don't you speak to the folks at Ascendo see what they'd recommend
fsmithjack's avatar
Ag insider logo xs@2x
fsmithjack OP
712 posts
 
Acendo recommends Behold and CAT which are incredible but way way out of my league other than those they recommend SS in the best quality and most power you can afford. They say that the more power the better even thought they are not hogs just different. Like all the manufactures they say they work great with tubes but all most all speaker makers say that Kind of thing. They are 88 sensitive and are 6ohm which doesn't seem like the toughest load and there is no crazy I mprediance drops either but the bass driver is not seen its inside the cabinet and pointing straight up and it fires upwards inside the cabinet and all you see on the front of the speaker is a big port whole where the bass comes from. Quite different and they have some of the best imaging and staging and my guess is that there is more there. With the proper grip on that 21 cm Kevlar driver which has these speakers go down to 29 I think it / they can go to another level. Its what I am doing asking about the Clayton. Pure Class A no A/B at all but A all the way and that is tube sounding and offers 300/8ohm and 600/4ohm so not positive but at my speakers 6/ohm I think they are at 500 Pure Class A vs CJ tubes from the late ninety's which offer 140 watts I think is a huge change but hoping to hear from others. Hoping tomorrow morning when I wake up I can decide between Clayton M300 or CJ LP140m which is a modern CJ amp that some on here say then newer ones do much better on bottom and are much more neutral. Any feedback is welcomed!!!! Thx
fsmithjack's avatar
Ag insider logo xs@2x
fsmithjack OP
712 posts
 
Typing on my phone sorry about all the type o's : )
More to discover