2. amps-preamps
  3. 1428160381

Clayton Audio Class A amps. Need amp advice

Hi Guys,

I am looking to change my amps and for a few reasons.

First because I just upgraded my DAC from the great PS Audio DirectStream to the incredible Bricasti M1 DSD USB DAC. I love the Bricasti and it has shown that in my system it could offer me more with a more resolving and neutral amp IMO.

I am currently am using the wonderful sounding CJ Premier 12 mono tube amps. I love them and tubes in general but my speakers are the great Ascendo C8 Renaissance and look to present a somewhat benign load being 88 efficient and 6ohm but they are unique and have an internal firing 21 cm Kevlar Bass driver that is great but stubborn and the speakers I think will really shine with a iron fist control of that driver.

I love tubes, always have and always will but I grown tires of a flabby bottom which is exasperated by a unique and somewhat difficult to grip bass driver set up I spoke about above.

I want an amp that can give me as much tube sound as possible but with Grip and bottom end. I know this is a lot to ask for in the used $5k to $7k price range.

I have read and it seem like the Clayton offer exactly what I am looking for but wanted to hear from some of you guys if anyone has ever heard them or know of them or anything. Any info would really be appreciated. Here is the info on my speakers and I will also list the rest of my system in case you think that is helpful. Thanks

C8 Renaissance
Technical Data
Principle
• Three-Way with SASB bass unit (TOS Off)
(current damped outer driver with semi symmetrical band pass)
• Four-Way with SASB bass unit (TOS On)
Dimensions (W/H/D)
• 28 / 80 / 40 (without Base)
• 28 / 108 / 40 (with Base)
Weight
35 kg
Frequency Range
29 Hz (-3 dB) – 32.000 Hz
Power Rating
350 W Program (min)
Impedance
6 Ohm
Sensivity
88 dB / 1W/m
Outer Chassis (COAX)
• 25 mm Neodymium-fabric-tweeter
• 18 cm Woofer with XP cone
Inner Chassis
• 21 cm Chassis, Kevlar cone
TOS Chassis
• Ribbon-tweeter
TOS Function
• switchable (TOS Unit - Dipole AN / AUS)
Sockets
• Single / BiWiring Base
Dimensions (W/H/D)
28 / 18 / 40 cm
Weight
11 kg

Ascendo C-8 Renaissance Speakers (Germany) Speaker
Purist Audio Design Corvus Praesto Revision 2.5m Bi-Wire Speaker cable
Darwin TRUTH Pure Silver Reference 1 Meter RCA Interconnect
Darwin TRUTH Pure Silver Reference 1 Meter RCA Interconnect
Bricasti M1 USB / DSD / Volume Control DAC (New) DA converter
Tellurium Q BLACK DIAMOND Reference USB Cable
Decware ZSTAGE External Triode Output StageTelefunken ECC801S
Audio Research REFERENCE 1 MK II w/Rhodium IEC/NOS Tubes Tube preamp
PS Audio PowerPlant Premier AC Regenerator
Conrad Johnson Premier 12 Mono's 140 Watts Tung-Sol KT120's Tube amp
Salamander Amplifier Stands (2) Synergy System AV Furniture Stand
BMI Shark Jeweler Grade Platinum 9 AWG AC Power Cable
Mad Scientist PC-NEO with Power Purifier 11 AWG Power Cable
Sablon Audio Petite Corona 2.0M 7 AWG AC Power Cable
JPS Labs The Power AC+ 2M 8 AWG AC Power Cable
Synergistic Research Labs Tesla Series SE T1 AC Power Cable
Synergistic Research Labs Tesla Series T1 AC Power Cable
PS Audio Noise Harvester (5) Converts noise to light
OYAIDE RI Beryllium Power Outlets (2)
Blue Circle Audio The Yalu Balula Industrial Surge/Spike Protection
JPLAY v5.2 hi-end audio player turns PC into a digital transport.
Fidelizer Pro Version 6.1
JRiver Media Center 19 Music Software
128x128Ag insider logo xs@2xfsmithjack
fsmithjack's avatar
Ag insider logo xs@2x
fsmithjack OP
712 posts
 
What do you guys think about the guy that builds the Hypex Ncore amps James Romeyn.

They seem like a great deal and are pretty much the same as the $4800 Thor from Merrill just without the fancy case. If these sound the same or almost as good as the Merrill Thors these seem like one the best amp deals going? Would love your advice. They used the exact same amps and power supply and internal wireing just different cash and maybe terminations. They have crazy power and everyone says they sound amazing. Super quite, crazy powerful with super low distortion. Paired with a great source and real hi quality cabling and a very high quality speaker these seem like it could be special? Am I wrong? Thanks
bill_k
918 posts
 
I would strongly suggest that you audition such an amp with your speakers, as they sound very different from the Class A bias amps that you have so far seemed to have a preference for. Not that they sound bad like some older Class D designs, just that they're different than Class A.
mitch2
4,043 posts
 
That is good advice Bill K.

I owned the M300s for several years and sold them last year. I currently own the Atsah NC1200 monos and a very tricked out McCormack/SMc DNA-2 LAE. So, I have had Class A, Class D and very good Class A/B amps all within a year. They are all very close in power ratings and not far separated in price. I still can't decide whether to keep the Class D monos or the Class A/B amp.

If I still owned the M300s the only thing that would change is that I wouldn't be able to decide between three amps, instead of between two amps. All of these are excellent sounding amplifiers, near the top of their class, and I suspect I would be happy with any of them but, they do sound different from each other. Listening with your own speakers is a really good idea to be sure of what you are getting.
josefm
53 posts
 
"What do you guys think about the guy that builds the Hypex Ncore amps James Romeyn.

They seem like a great deal and are pretty much the same as the $4800 Thor from Merrill just without the fancy case."

No they are NOT the same. Different modules.
mechans
3,048 posts
 
I have no dog in this fight, but even if they share some common parts other elements are usually different. For instance capacitors vary widely with regard to SQ and which resistors you use, and the ratings of those components can differ. They may look a lot alike but be quite different. That is giving them the benefit of the doubt.
Arguing for the same except for the casework is the generally accepted knowledge that the case work in general and faceplates in particulars are frequently the most expensive element in an amp.
More to discover