positioning of a horn speaker

Definitely too far apart to cause a lack in centre imaging and bass definition.

You will have to move them closer to each other, or sit really further away. Also as morningstaraudio mentioned toe them in so they cross in front of you. but I still feel that you will then lack the bass oomph!

my thoughts- move them closer to each other till the centre voice balances in weight and volume to the other instruments. too close togther will make the centre fill too prominent.
Cheers,
neville

Also, you may want to look and make sure that the speaker wires are plugged in correctly. Crossed wires can screw up the imaging.

I agree with Neville. Move them closer together. This same issue plagued me until I moved my horns a little closer together than the distance to my listening position. For instance, I sit about 11' from the mouth of both horns and they are now about 8' apart from each other. I believe this is due to the more direct radiation of horns.

The toe-in may work for you. It didn't for me. Probably some room interaction here. I find mine sound best when aimed just outside of my position, over each shoulder but not crossed. I'm not one to make a big deal of imaging so I happened upon this setup through experiments to remove other artifacts I was hearing at the time.

try the long wall and further apart and play with toe-in until you have it. Every half of inch will be different....

I design horn speakers with the expectation that they will be toed in severely, as Morningstaraudio describes, so that may work with the Tylers. If not, then I suggest moving them closer to one another.

Duke