Can you get "bookshelf sound" from a floorstander?

Thanks so much for the detailed response. So adjusting the tightness of the screws holding the tweeter in place, changing batteries in the BAM, using lead-free solder and removing the tiny amount of lead contained in the drivers has led to a $6,000 increase in price and a night and day difference in the VSM's sound. Well, those and the other tweaks you mentioned. That certainly works for me. I'm glad so many people feel the same way and are willing to spend $11,500 plus another $20,000 to $30,000 for the recommended cables and electronics. Dedication and passion deserve to be rewarded.

9rw, do i sense a little bit of sarcasm surfacing again?

the vsm was designed to be an all out effort for small to moderate sized real world environments. if it is used the way it was designed to be used, there is no reason it should not be a stellar performer for its listener. with its amplitude deviation being plus or minus 2.1 db from 35 hz to 19.5 khz, the superb drivers, the careful choice crossover parts (many proprietery) and the thoughtful design approach, this thing should be capable of enormous resolution and it is. it is easy to drive, offers wide bandwidth, it is efficient and distortion free. a product like this will make little things/changes very obvious to the listener. so when i tell you the cabinet was changed with new construction techniques for the new pan fiber cabinet material, polyeurathane glues used, new proprietery z foot coupling feet, foot orientation/fasteners, port tuning/anti chuffing design, internal damping materials to dacron fiber fill, bracing added and the minimizing of diffraction effects... can you hear a difference? well imho and to most others, it was "huge" as you say.

over the years we carefully worked with the networks too adding proprietery inductors, added q circuitry in the hf, changed wiring harnesses to proprietery cardas, cardas patented terminals, cryo and lead free lead to even bigger improvements in the sound.

just because it looks very similar to an earlier vsm doesn't mean it sounds like one. ever compared a strad to a yamaha violin? i have. they both look like violins but only the strad sounds like one.

you also keep mentioning people using $20,000 to $30,000 in ancillaries like it was bad or a necessity. we have people using very low powered low cost amps (nad, sugden, audio analogue etc.,) with zip cord or signal cable and from what they tell me, enjoying themselves a very great deal. at least the vsm does not cover up or hide the effects of expensive gear. it changes in sonic character in the way of completeness or oneness when a better match is found. but because it is neutral it does not embellish the the faults found in some pieces.

and last of all the price. you mention $11,500 like it is a rip or i over charge. the truth is, suggested retail is a function of cost and mark up. industry standard is 4 to 5 times and many mark up more so. some i know of go as high as 8 to 10 times. the vsm mxe cost me $3300 to build. this is a 3.5 time mark up and an industry low. you also mention that the speaker has gone up $6000. well the finish alone on the mxe costs merlin $850 a pair to have done. this reflects in $3000 in retial. this finish was not available at the time that the speakers sold for $6000. nor were many of the other parts included in current production. i think it would be more fair to compare apples to apples... in 15 years do you not think my costs have gone up? everything has gone up at least 30 to 60%. i made little profit at the beginning and i still do. now that i have taken the time to explain all this to you, try and be a little more fair minded.
enjoy memorial day. i got up early to take care of this for you.
best, b

Since the last 8 posts here have been Bobby and 9rw and are OT, I'll start a new thread for you guys, see:

Another Merlin Thread

Then we can return this one to "regular programming" for the OP.

Marty

Marty: Thanks a lot, but I think Bobby's last post covers everything. By the way, do you still own a pair of Merlin speakers? If so, what do you use with them? Thanks for sharing.

So it appears as though Marty no longer owns a pair of Merlin speakers. I wonder why that is.