Top notch speakers with their own sub

Someone up there mentioned "Vandy V".

In the Vandersteen line the top 4 -- Quatro, Quatro Wood, 5A, and the new 7 -- have integrated powered subwoofers with 11-band EQ and contour controls.

I'm more suprised no one mentioned the Definitive Technology Mythos STS and ST speakers. No bass EQ, though.

I listened to the Vandersteen/Ayre combination at a show and did enjoy the relaxed presentation. However this was a show with people constantly came by. So it wouldn't be fair if I conclude that Vandersteen 5A is about a trade off to Prelude MTS. Does anybody have studio comparison between Vandy 5A and Prelude MTS or Watt/Puppy 8?

Martykl writes:

>The Deqx idea I mentioned in my previous post is simply a "brute force" EQ solution. It allows the peaks and nulls to develop and beats them into submission with EQ. Audyssey and Velodyne (among others) also make EQ products for this purpose.

Nulls can't be fixed with equalization. With a 10dB NULL you need 10X the power or 3X the displacement you have at other frequencies. With 20dB it's 100X or 9X.

If you need 100W for sufficient bass head-room and aren't excursion limited, you'll need at least 2000W to overcome a 10dB null due to thermal compression. If you are excursion limited and are stacking woofers in the same location you'll need to triple their count.

Listener and/or speaker movement are the only reasonable solutions for nulls. I had to move my chair six inches to get decent bass in my current living room.

Drew,

Nulls can be fixed with EQ - with some limitations. I have Eq'd to +12db with a pair of Velodyne SPLR 8 subs (1000wpc internal amps IIRC) and achieved excellent results. To muster +12db, I doubled down on the SPLR's internal EQ and added extra maximum EQ in my SMS sub controller. This approach IS DEFINITELY NOT recommended by Velodyne, but I did it anyway. Make no mistake, it worked....in my application.

I suspect that the real reason this approach can work well in music only systems is because my max EQ occured below 35hz where the pair of 8" drivers in the subs conked out. In actual use (playing music) there's little sustained signal there. OTOH, the EQ'd subs performed like a champ running test sweeps! I won't disagree with you that this approach lacks "elegance" and, in fact, could prove risky if amplification demands exceed the power available.

The real point I was making Re: DEQX powered speakers, however, is that straight EQ (including bass nulls) is the theory behind the design. I agree that you have correctly pointed out one significant limitation of the "brute force" approach.

Marty

Marty,

It may work on certain soft music but an extra 12 db boost below 35 Hz is a gargantuan and scary extra amount for a poor subwoofer to put out. If you do this then I'd be extremely careful not to blow them up through excessive excursion or from burning up the voice coils.

Most 8 inch subwoofers are unlikely to play cleanly at 20 Hz or much below 35 Hz with anything more than 90 sb SPL output (which is barely audible). Below 35 Hz is really really tough territory for ANY subwoofer.

Another issure is ringing.....filters that boost will ring like a bell - as you exceed 6 db boost with a narrow high Q filter then the ringing will become progressively audible. Therefore it is best to use notch filters (sharp cuts) rather than any boost.