Hi Alex
Congrats..nice speakers. I personally owned them at one time.
Soundstage review
You will find 27 "actual user" reviews of the speakers.
here
As you know the speakers will work with 50 -250 wpc.
They are also 90 db efficiency and dip just below 4 ohms (3.7 ohms) .
My personal experience is that they will work with tube amps as well as Solid State amps when using the 4 ohms tap with a tube amp.
But it depends on.
Your room size (volume)
Where will speakers be placed in the room and where will you be sitting in relation to them.
Your listening habits and the kind of music you listen to. If you can give more info here then amps can be recommended.
Important
Bass takes the most energy from the amp.
All 800 matrix series speakers were designed to be used with the BASS ALIGNMENT FILTER for best results.
803 Matrix S2 Bass loadiing.
Direct from the manual.
WITH BAF filter - sixth order butterworth with 25 hz cutoff.
WITHOUT the BAF filter - overdamped fourth order -6db at 28 hz.
You can see without the filter, as is, they are " -6db at 28 hz " - quite a drop. We can discuss why this is if you like.
If used for 2 channel music, with the BAF in use, you may not need a sub.
But it will depend on room/listening factors I mentioned above.
Hope this helps. Cheers
Congrats..nice speakers. I personally owned them at one time.
Soundstage review
You will find 27 "actual user" reviews of the speakers.
here
As you know the speakers will work with 50 -250 wpc.
They are also 90 db efficiency and dip just below 4 ohms (3.7 ohms) .
My personal experience is that they will work with tube amps as well as Solid State amps when using the 4 ohms tap with a tube amp.
But it depends on.
Your room size (volume)
Where will speakers be placed in the room and where will you be sitting in relation to them.
Your listening habits and the kind of music you listen to. If you can give more info here then amps can be recommended.
Important
Bass takes the most energy from the amp.
All 800 matrix series speakers were designed to be used with the BASS ALIGNMENT FILTER for best results.
803 Matrix S2 Bass loadiing.
Direct from the manual.
WITH BAF filter - sixth order butterworth with 25 hz cutoff.
WITHOUT the BAF filter - overdamped fourth order -6db at 28 hz.
You can see without the filter, as is, they are " -6db at 28 hz " - quite a drop. We can discuss why this is if you like.
If used for 2 channel music, with the BAF in use, you may not need a sub.
But it will depend on room/listening factors I mentioned above.
Hope this helps. Cheers