Klipschorn Imaging


I have a pair of 1980s klipschorn for about a year. I have not heard anything sound this large or so dynamic, but for about a couple of months I have been trying to get them to image well and I am failing.
I have Onkyo TX SR806 (I have some HDMI sources) with pre amp out to MiniWatt 2.5 watt tube amplifier.
One is in the corner flush while the other has wall only on one side (no chance of getting a wall there and false corner likely will look bad).
I have tried using Sonic Impact T amp and that did not provide any imaging either.
The room is 25 ft by 25 ft with the speakers about 10 ft apart.
Is this just the nature of the speaker or has anyone been able to achive good holographic imaging?
Thank you for your inputs.
blueacara
One is in the corner flush while the other has wall only on one side (no chance of getting a wall there and false corner likely will look bad).

I suspect your main problem with imaging is a result of the room asymmetry noted in the quote.

Room treatment may help, as may experimenting with placement of the speakers or other objects in the room. Even something as simple as a coffee table in between the speakers and the listener can screw up imaging. Experimenting with the toe-in of the speakers or listening chair position may also help.

Our brain localizes sound objects in space by analyzing the differences in sound between the left and right ears. Transient arrival time is involved, as well as the relative loss of high frequency response to the ear in the "shadow", and below about 1,500 Hz, the phase differential between the left and right ears is noticeable.

If the fundamentals of speaker placement and room acoustics are not basically correct, it is very tough to make up that distance with equipment changes or tweaks.
I've had the K's, and yes imaging is a problem. They have the so called 'sweet spot' problem. So, unless you find it in the room you have, they will not image since you cannot move the K's. My solution was a center channel, a Belle and a pre-amp that had a center channel blend that fed the Belle. No longer have the K's since I lost the room for them. As others have said, they are a great speaker, but with the right room. Lastly, I fell for K, in its mono days when imaging was not an issue. Enjoy the music.
There is no way 10' is too far apart for Klipshorns.

Blueacara, Since your Klipschorns have a built-in toe angle it is important that you are sitting at the proper distance from the speakers. Try adjusting your listening position so the speakers are crossing at your knees +/-.
I stand corrected. It was the Cornwall. I have seen single Cornwall's for sale on Audiogon.
I pushed the klipschorns to both corners (and ended up closing off a door) and they are now situated about 15 ft apart and the sound crosses my knees- kind of. It is better imaging- at least the sound is now coming from the wall inbetween the speakers. No holographic imaging still.

I am now looking towards closing off the back- although I might loose wall reinforcement of bass.

I was looking towards different tweaks as well- has anyone used 47lab cable kit?

Not sure I am up for tube rolling just yet-not sure which tube fits my amp.
The sound is good enough that I don't mind loss of imaging a lot.
Bob_Bundes-- do you have good imaging with your belles?

Thanks a lot for your replies guys.