Bring on the criticism...


So I was swapping out my Maxx 1's for 2's a few weeks ago and yesterday it occurred to me since I can't bi-amp like I have always wanted I would bi-speaker. Two Maxx's side by each running off my FPB450's. I guess I never really considered myself an audiophile and this must confirm it, but I really like the stage it's throwing.
screename
I did this when I blew the tweeters in my JBL L88's in the '70's. Removed the tweeters and sent them to JBL for repair/replacement (which they did with no charge, even though I was not the original owner of the speakers. Wow!) Anyway, I had a month or two with no tweeters. So since my Pioneer receiver had two sets of speaker outs, I connected a pair of no-name speakers from my first department store brand stereo, and placed them on top of the big JBL's. Problem solved.
If you can afford to do that, why can't you biamp?
Can't bi-amp Maxx's

you could pay a lot less for a PA system that could do that
But it wouldn't be a Wilson PA....lol
my only question is with the volumn set in one position does the sound level from speaker set A equal the sound level of speaker set B?
Both speakers are coming straight off the FPB450's so they are being fed the same power.
Correct they are being fed the same power but are they playing at equal sound pressure levels or is one pair louder than the other;that's what I was questioning.
It doesn't matter if the sensivity of the two are different. The effect is the same a wall of sound. I did this to get as much sound as I could. Then I started to like soundstage and imaging. Now I use 1 pair at a time and my tube amps wouldn't exactly like the drop in resistance.
Although I still have some SS amps and Klipsch LaScalas which I have once or twice connected in parallel to vintage JBL C36 and C38s (Yes both using D-130s, 131s with 075 tweeters)They are exquisitely sensative and seem to compete well with the Klipsch. I do it just for sheer volume try playing BBBAD Bad To The Bone like that when you feel raucous.I am rally getting too old for that I must admit.
Hmmm. interesting.

The tonal balance probably becomes a bit warmer, as each side's output will combine in-phase at low frequencies, while as Shadorne noted you will get comb-filtering (partial cancellation) at higher frequencies.

Comb filtering often looks a lot worse than it sounds; apparently the ear-brain mechanism is relatively tolerant of it.

Not knowing the exact geometry of the setup I can only speculate, but it's possible that the output from the outer speakers is arriving late enough that directional cues from its output are suppressed by the precedence effect. If so, imaging could be holding up quite well. Timbre may be richer and more vivid as well.

Duke
dealer/manufacturer