also check all the wires bellow and possibly inside the tonearm...the bearing must also be in perfect centre from each side....how good is the rubber "dumper" between the weight and arm tube?
Help:Anti skate on Tonearm with no anti-skate
Hi Guys
I am having trouble with my right channel having distortion/mistracking. When i place my cartridge on a Cardas Test disk it shoots towards the center very quickly instead of very slowing. This points to a lack of antiskate on the outside of the tonearm(Right Channel).
The tone arm i am using is a 1990's Ortofon RMG309i Tonearm which has not antiskate settings. In the instruction manual it states it has built in antiskate bias.
e.jpg
My question is how do i increase the antiskate because i have a feeling this is the cause of the distortion/mistracking on the right channel.I have checked the VTA, VTF and Azimuth and they all sound correct. My Cartridge is a Shindo Ortofon SPU.
Any help would be great.
Thanks
Quote
MultiQuote
Edit
I am having trouble with my right channel having distortion/mistracking. When i place my cartridge on a Cardas Test disk it shoots towards the center very quickly instead of very slowing. This points to a lack of antiskate on the outside of the tonearm(Right Channel).
The tone arm i am using is a 1990's Ortofon RMG309i Tonearm which has not antiskate settings. In the instruction manual it states it has built in antiskate bias.
e.jpg
My question is how do i increase the antiskate because i have a feeling this is the cause of the distortion/mistracking on the right channel.I have checked the VTA, VTF and Azimuth and they all sound correct. My Cartridge is a Shindo Ortofon SPU.
Any help would be great.
Thanks
Quote
MultiQuote
Edit
- ...
- 6 posts total
- 6 posts total