As Geoff said, roller bearings give you isolation/decoupling in the lateral/horizontal/rotational plane, but not in the horizontal. As he also said, springs can be used to isolate in the vertical plane. That spring can be a typical metal one as found in the suspensions of AR/Linn type turntables and most automobiles, or it can be an air spring, like the old Townshend Seismic Sink. There's one on Audiogon for $300 right now, in fact. One can be made for much cheaper---it's just an inner tube between two platforms (Baltic Birch ply works great), inflated just enough to raise the top off the bottom. The lower the air pressure, the lower the resonant frequency and greater the isolation. Great for non-suspended tables, CD transports, and electronics. Tables with suspensions, I don't know. Does the air spring interact with the table's suspension? A metal spring isolation platform under a table with a spring suspension is supposedly not a good idea for that very reason.
Footers under big heavy speakers (Stillpoints Ultra 5, Sistrum rack, Finite Elements,..?)
Revisiting isolation and coupling for my main system, I wonder if I would try better coupling devices than the large Symposium Svelte shelves (19"x24") I currently have under my Duntech Sovereign 2001s
with 21" w x 35" d wooden base, weighing 360lbs each, which in turn rests directly onto wooden floor. My room was pretty lively before the isolation/coupling and I need better coupling/draining of energy for the speakers.
What would you suggest?
I could try four Stillpoints Ultra 5 with base under each speaker or what I hope to be at least equally good and more economically is a pair of Sistrum rack platform (using AudioPoints 1.5) that measures 22.75"x 26.75" (I don't think their standard speaker stands can provide enough balance). I could buy a Sistrum SP-4 rack and use two platforms for my speakers. This would be budget wise the same if I would buy two Apprentice SP-SA-XL-4-1.5 (18"x24") as I am looking for a new rack for my second system (Home Theater).
Star Sound seems to be a very reputable company but earns less coverage than, e.g. Stillpoints.
The third and probably least talked about solution would be Finite Elements Cerabase but I find less buzz here on the Gon.
What would you suggest?
I could try four Stillpoints Ultra 5 with base under each speaker or what I hope to be at least equally good and more economically is a pair of Sistrum rack platform (using AudioPoints 1.5) that measures 22.75"x 26.75" (I don't think their standard speaker stands can provide enough balance). I could buy a Sistrum SP-4 rack and use two platforms for my speakers. This would be budget wise the same if I would buy two Apprentice SP-SA-XL-4-1.5 (18"x24") as I am looking for a new rack for my second system (Home Theater).
Star Sound seems to be a very reputable company but earns less coverage than, e.g. Stillpoints.
The third and probably least talked about solution would be Finite Elements Cerabase but I find less buzz here on the Gon.
- ...
- 34 posts total
- 34 posts total