Taralabs cables


Hi, I wanted to start a new thread for all the owners of Taralabs cables, Enjoy, and cheers.
128x128audiolabyrinth
Hi greg,  you can call me Keith,  the answer to your question,  this depends on the equipment being used,  meaning,  the 0.8 has more resolution,  never mix taralab's cable's,  if you mix with other brand's with the 0.8 or any cable below the zero gold,  you will have a lean sound,  if you use matching taralab's cable's throughout,  you will have depth,  better resolution,  bass, etc. ..the 0.8 will expose more information- resolution if the equipment is up to par, no one can hear a big difference if you were using something like a Rotel component system. 

Keith, thank you for the info. I'mm using Sonus Faber Guarneri Evo and accuphase e-470 amp and accuphase dp-550 player. Will the Air Evo (I already placed the order) speaker cables be adequate for my system? Are you saying that I have to use tara labs complete loom in order to avoid lean sound? This sounds strange. It  is not always the case. I will not be able to get a fool loom of tara labs. For ICs and power cords I have a great cables that I intend to keep.

I have to disagree about using a full loom of Tara cables. I'm even a Tara dealer and I don't use a full loom. I tried using all Tara interconnects and the sound was way to lean. I now just use The 0.3 ic between my pre and amps and other brands throughout and now I have that full, rich, detailed sound I'm after.

(Dealer disclaimer)
Hi  greg,  very nice system,  what is your interconnect's and power cable's?,,  Greg,  what I'm saying is if and when you can get taralab's interconnect's and power cord's,  compared to a full loom,  it will not be as good,  keep in mind, you will not know unless you have a complete burned in full loom that not useing a full loom is lean in comparison,  so really,  in your case,  you won't know the difference,  you will like a lot what you just bought,  your speaker's go down to 40htz so you will be surprised what the taralab's air Evolution and m1 bi-cableing jumper cable's will do,  remember,  do 300 hrs before you have your final impressions of the sound,  Greg,  it took time for me to get the full loom of taralab's cable's because of the expense of admission,  I had the taralab's the one speaker cable's for over a year and no after market power cord,  then I got the taralab's cobalt power cord with oyaida termination's,  then the taralab's zero gold interconnect months later,  then I finally got the final piece,  the taralab's omega gold speaker cable's , omg, did I ever get huge bass depth and frequency extension when I got the full matching model loom, it was a night and day difference,  I have no regrets, I love the sound I have,  I could live out my life with this cable set up,  however,  after talking to Devon Scott- vise president of taralab's a few times on the phone,  I will be selling my beloved interconnect's and speaker cable's to up grade to the taralab's Evolution zero Interconnect's and Evolution omega speaker cable's,  my speaker cable's use to be Michael fremmer's of stereophile magazine  cable's,  my speaker cable's are 8ft and the interconnect is 1-meter balanced,  the speaker cable's were  $24,000.00 retail,  the interconnect was  $14,500.00 retail,  I'm going to put them up for sale together for  $18,000.00 which is an incredible deal if any one is interested,  then later,  I will get the taralab's matching Evolution power cord. 
Sksos1, HI Steven, did you use the 0.3 speaker cable’s and taralab’s power cord’s when you used more than one pair of 0.3 interconnect’s? , if you did not, you would not have noticed the bass depth and improved resolution, and a rich tone, what you posted really back’s what I posted to Greg .