2. analog
  3. 123769-18279

Need New MM Cartridge Recommendation

Hello All!

I need a recommendation on a new moving magnet phono cartridge. 

Here's my system:

Roksan Radius 5 (I think MK1 or 2) turntable 
Creek Evolution 100A integrated amplifier with Creek Sequel MM board
PSB Imagine T2 loudspeakers 

The Roksan came with a Roksan Corus Black MM cartridge, which was likely a Goldring manufactured cart.  It was great!  The stylus broke off after about 8 years use. 

I was wondering about the following but am open to all recommendations: 

Clearaudio Maestro (yikes! It's $1200)
Ortofon 2m Black
Goldring carts similar to Corus
Audio Technica AT150MLX

Any insight and recommendations will be super appreciated!

PS:   Sequel 40 mk2 MM Phono pre-amp is the device specifically suited for most types of Moving Magnet cartridges, with an output between 3.5 to 5mV and a matching impedance of 47k Ohms.
128x128jbhiller
stevecham
3,340 posts
 
Definitely the 2M Black; I have one and it is one of the best sounding MM cartridges around).  Also, the AT 440 mla, now the AT 440 mlb is another wonderful cartridge I enjoy that is worthy of serious consideration.
mechans
3,048 posts
 
If you want a MC sound with MM sensitivity parameters in your  cartridge get  a high output moving coil like the Dynevector 20x .  It will work with your MM phono stage. I came on my Scout (VPI).  I also own a Music Hall MMF-5 table and an MM Goldring Cart. I forget the signal strength it generates, but is very very different .  The SQ of the MM is rounded and retty, with no emphasis on detail. The MC is very detailed and has a precise . Some might use the classic Detail vs Musicality description. I like the analytic beter myself but the DV 20)X  Dynevector.  They are expensive but less thn your $1200 example.
inna
7,296 posts
 
Just because some choices are more popular doesn't mean that they are better. There are herd instinct issues, prestige considerations and other kinds of bullshit. There are also people whose hearing is not so good.
Trust the British tables fan - forget those Dynas, Ortos and ATs, that's money waist. Goldring 1042 or Soundsmith Carmen or higher. Or even better choice - have your cartridge fixed by Soundsmith and upgrade only when you are ready to upgrade your phono stage as well. Cartridge should be good enough. but it is the least significant element in analog set-up.
paraneer's avatar
paraneer
818 posts
 

The compliance rating of the cartridge and its compatibility with your tone arm to avoid unwanted resonant frequencies must be taken into account too.

I assume your Radius has the Roksan Nima tonearm. If so, its effective mass is 10 grams making it a good match with any of the three MM cartridges you mentioned in your original post. If you have another tonearm, then this could be a different story and resonant frequency of the cartridge/tonearm should be re-evaluated to insure a proper match.

Of course just because the compliance match is right, they will still sound different and I would encourage an audition of each if possible. Cartridges, like speakers, are transducers and each brand will sound quite different from one another.

I will throw another in the mix for your to consider also - the Nagaoka MP-500. Sorry to further complicate matters but this cartridge is another world class MM cartridge and deserves to be in your group. Good luck!

jbhiller's avatar
jbhiller OP
1,399 posts
 
Yes, I have the Nina tonearm.  Thank you for checking the stats and making a recommendation. Also, I'm off to check out your cartridge recommendation. 
More to discover