2. analog
  3. 123769-18279

Need New MM Cartridge Recommendation

Hello All!

I need a recommendation on a new moving magnet phono cartridge. 

Here's my system:

Roksan Radius 5 (I think MK1 or 2) turntable 
Creek Evolution 100A integrated amplifier with Creek Sequel MM board
PSB Imagine T2 loudspeakers 

The Roksan came with a Roksan Corus Black MM cartridge, which was likely a Goldring manufactured cart.  It was great!  The stylus broke off after about 8 years use. 

I was wondering about the following but am open to all recommendations: 

Clearaudio Maestro (yikes! It's $1200)
Ortofon 2m Black
Goldring carts similar to Corus
Audio Technica AT150MLX

Any insight and recommendations will be super appreciated!

PS:   Sequel 40 mk2 MM Phono pre-amp is the device specifically suited for most types of Moving Magnet cartridges, with an output between 3.5 to 5mV and a matching impedance of 47k Ohms.
128x128jbhiller
jbhiller's avatar
jbhiller OP
1,399 posts
 
Fleib

Here are the stats on the Creek Sequel: 
  • Gain x100 (40 dB)
  • Frequency Response
    10 Hz to 20 kHz +/- 0.5 dB
  • Signal to Noise Ratio – 80 dB
  • Total Harmonic Distortion < 0.03%
  • R1AA deviation +/- 0.5%
  • Output 400 mV from 4mV input
  • Input Sensitivity / Impedance/ Capacitance – 4mV / 47K Ohm / 220pF
  • Overload Margin 22 dB
  • Suitable for medium to high output MM cartridges in the range of 3.5mV – 5mV output
Creek offers 3 models for MM, High Output MC, and MC. 

I've spent a good bit of dough recently so I'm going to hold off on buying stuff for a bit. I would, however, like to try other cartridges as I'm getting back into vinyl and my system in a big way. 

fleib
1,124 posts
 

Chakster,

It will be interesting to see what you come up with regarding the X1-II.

Griffithds loaned me a MK I, but the stylus was loose and I'm not sure if I secured it enough.  I had better results with the Z1/SAS.

Regards,

fleib
1,124 posts
 

Jbhiller,

Your Creek phono board is old school regarding shunt capacitance. It might be better suited for the Ortofon in that respect.  225pF was sort of a defacto standard MM capacitance for awhile.  More "modern" pieces tend to use 100pF. 

Regardless, this is the cart I recommend:

http://www.amazon.com/Audio-Technica-AT7V-phono-cartridge-Japan/dp/B00008B5EB/ref=sr_1_1?ie=UTF8&...

If you get it from Amazon you also get free shipping and they stand behind the sale.  You'll also need an ATN150MLX stylus.  Zzounds.com is an authorized dealer and sells it for $200. 

The stock configuration is made with a heavier arm in mind, but I'm quite sure it will work. The cart takes on the compliance, VTF etc. of the stylus and you'll be amazed at the performance here.  Under the circumstance I'm not sure how much of the potential will be realized, but I think you'll enjoy the performance.

Regards,

Ag insider logo xs@2x
rauliruegas
13,046 posts
 
Dear dentdog: I have experience with almost all the top Nagaoka models but that's not the point but the swetness you speak.

If you are in a live event at 3 m. from a gentleman playing a cornet where you can detect those nuances in the undertones, sorry no way. Music is not that way.

Nothing wrong with what you like in an audio system that performs very different ( any system. ) from a live music. I always try to stay nearest to the recording and live music but is imposible to even that.

Regards and enjoy the music,
R.
fleib
1,124 posts
 

Raul,

Dentdog asked you to butt out.  Do you know what that means?

It means, for whatever reason he does not want to hear further thoughts or comments on the subject from you. 

Sincerely,

More to discover