Classe ssp 600 vs 800 ?

i have aerial 10t's with 2 of their subwoofer's..driven by a mac amp 501 for the fronts and the mac 7505 for the macintosh rears and center channel...being more of an audio than video guy, which classe surround processor and cd player would u recommend, being reasonably economical in the used market? thinking ssp 75 vs 600? i have 3 other systems with top quality gear, rowland, pass, levinson, meridian..for music and theatre in the family room..
Rich

I know from owning it the balanced bypass for 2-ch on the SSP-600 is very good. I've heard the SSP-800 is much better in every way. What I found particularly effective was to utilize an SSP-600 for surround decoding and to handle the center, LS/RS and LSB/RSB channels while pairing with a CP-700 pre-amp on unity gain for the front L/R channels (home theater bypass as it is called...). The SSP 75 also has a great reputation but if can afford only 1 unit, make it the 800 or 600 (IMHO).

any one Help me turn on SUB wooffer
I has problem with pre SSp-600
DVD AUDIO out go to In put OPTICAL .
XLR BALANCE OUT go to AMP
"""and SUB out put go to SUB ..... '''But the SUB never have noise.
SOME ONE HELP ME
THANK YOU

You will not be getting DVD-A resolution by an optical connector.....

Correct...same with SACD. You need to run analog audio cables from your player into the SSP-600s pre-amp analog inputs. The only time the SUB will receive input from the SSP-600 is when you have a Dolby Digital 5.1, 6.1 or 7.1 (or DTS 5.1 or 6.1) source. For SUB to have input on analog audio outputs you need to be using a subwoofer similar to a REL with the hi-pass input off the amplifier mains unless someone has figured out how to do this otherwise...