2. cables
  3. 124345-1776

Direction of aftermarket fuses (only for believers!)

It is with reluctance that I start another thread on this topic with the ONLY GOAL for believers to share their experience about aftermarket fuses.
To others: you can call us snobs, emperors w/o clothes,... etc but I hope you refrain posting just your opinion here. If you did not hear any difference, great, maybe there isn’t.

The main driver for this new post is that I am starting a project to mod my NAD M25 7 ch amp for my home theater. It has 19 fuses (2 per channel, 4 on the power supply board, 1 main AC) and I will try a mix of AMR Gold, SR Black and Audio Magic Platinum (anyway that is the plan, I may try out some other brands/models). As it is reasonably difficult to change them, esp the ones on each channel module that requires complete disassembly, I would like to know what the direction is for these models mentioned and of course, others who HAVE HEARD there is a difference please share your experience on any fuse model you have tried.

Fuses are IME directional:
Isoclean is one of the first to indicate the direction (2008/2009) on their fuses. Users of HiFi Tuning (when the awareness rose quite a bit amongst audiophiles) have mostly heard the difference.

As an IEEE engineer, I was highly skeptical of cabling decades ago (I like the speaker design of John Dunlavy but he said on many occasions that cables nor footers matter at all, WRONG!). Luckily, my curiosity proved me wrong as well. I see the same skepticism that I and many others had about the need for aftermarket cables many, many years ago now on fuses and esp on the direction on fuses.

Another example is the direction of capacitors (I do not mean electrolytic types). Even some manufacturers now and certainly many in the past did not believe it can make a difference sonically. Maybe some do but it takes time in the assembly to sort and put them in the right direction/order (esp as some of the cap manufacturers still do not indicate "polarity") so that maybe is one argument why this is not universally implemented.








jazzonthehudson
geoffkait's avatar
geoffkait
23,365 posts
 
Al wrote,

"Not sure if anyone here has been that thorough, but it seems to me that the less likely and the less explainable a perceived effect would seem to be, the greater the degree of thoroughness that is called for before reaching a conclusion as to its cause."

Are you suggesting that you have done the experiment with the same "thoroughness" you demand of others? Put another way, it almost sounds like you’re saying if someone's results don’t corroborate your theory then he must have done the experiment wrong. How convenient.

Cheers
almarg's avatar
almarg
9,670 posts
 
Are you suggesting that you have done the experiment with the same "thoroughness" you demand of others?
No, Geoff, I’m not. I didn’t say that, and I didn’t mean that.

As you probably realize I haven’t done the experiment at all. But if I did choose to do it, I would do it with the thoroughness I described.

Regards,
-- Al

geoffkait's avatar
geoffkait
23,365 posts
 

almarg
6,392 posts
05-23-2016 5:32pm
Geoffkait: Are you suggesting that you have done the experiment with the same "thoroughness" you demand of others?

"No, Geoff, I’m not. I didn’t say that, and I didn’t mean that.

As you probably realize I haven’t done the experiment at all. But if I did choose to do it, I would do it with the thoroughness I described."

Al, if you (and Atmasphere) really were thorough you would simply eliminate the fuse holder entirely, no?

cheers, geoff


atmasphere's avatar
atmasphere
12,164 posts
 
Al, if you (and Atmasphere) really were thorough you would simply eliminate the fuse holder entirely, no?
No. That would never meet UL, CE or other directives.
geoffkait's avatar
geoffkait
23,365 posts
 

atmasphere
4,816 posts
05-23-2016 6:07pm
Geoffkait: Al, if you (and Atmasphere) really were thorough you would simply eliminate the fuse holder entirely, no?

No. That would never meet UL, CE or other directives.

I meant if you wanted to get to the truth you would eliminate the fuse holder from the equation. You know, for the experiment. Capish? Whether or not aftermarket fuses meet UL, etc. is irrelevant to the question of directionality. You don’t really think audiophiles care if their fuses are UL listed, do you?

UL is a directive? You make it sound like a requirement. 

cheers

More to discover