Mike if I thought that would work I would give it a try.....Its absolutely crazy you can't get a few little clips to hold the grill on one of suppose able great speakers........Same thing with my Wilson Cubs, 5000.00 speakers and no way to keep the grills from falling off .......A guy might as well put a big gob of silicon in the corners and call it good........One of the Proac guys thought that Velcro was the answer.......?!?!
- ...
- 15 posts total
Not sure what ProAcs you own but these pegs look almost identical to the pegs on my Response 2.5’s. I measured the ball diameter on my pair and its 0.225 in. The ball diameter of the peg I linked to below is .just 005 in. larger. They Might work, I’m unsure of the other measurements but at 41 cents each I’d buy a couple just to try. https://www.madisoundspeakerstore.com/grill-fasteners/peglock-grill-fastener-peg-and-socket/ |
Sorry, I forgot you mentioned the Madisound pegs already. The pegs in the link below should work, I measured mine with my digital caliper and found the shank from the flange to the ball tip to be 16 mm long and the ball 5.70 mm in diameter as opposed to 6 mm in the pegs I linked to but I suspect they have compressed the .3 mm over the years. There are detailed dimensions in the item description. http://m.ebay.ca/itm/NEW-20-Pairs-Ball-and-Socket-Type-Grill-Guides-Pegs-Plastic-Screws-Speaker-Part... |
- 15 posts total