Yamaha GT 2000 Turntable


Hello there ! Looking for any Yamaha GT 2000 owners / ex owners out there to share their experience and opinions regarding this turntable ..
blz_tone
Axel stated on the 2000x page that the 18Kg platter was optional. The mistake he made was in saying that the increased diameter motor shaft in the x was necessary for the 18Kg platter. It isn't. The 18Kg platter was introduced 3 years before the release of the 2000x with the release of the 2000/L models which had the smaller diameter motor shaft.

lewm, I would expect that since you already own some thoroughly excellent Direct Drives, that the 2000 won't blow you away sonically. I also doubt that you'd be disappointed with it.

Dear @lewm : You posted and " ask me: 

"""  So, I would ask for some hard facts, like what is the platter mass, what kind of motor does it use and how much torque does it generate when needed?  How is the plinth made and with what materials that we might think are good for dampening? """

and what I posted was that everythink is in the link and that you have to read it again and that all the 2000 series comes with coreless kind of motor.

Yes, specs maybe don't tell us all but it's important to take in count because ( some way or the other ) is the only objective information we have because we don't have on hand the 2000. My statement is valid for any audio item, I know you don't " care " and fine with me.

The @jpjones3318 post is right regarding that in that spec Yamaha did not specify the standar below took that measure.
After that post I check in the japanese bible and that 0.005 number is stated as 0.002%! showing no standard about.

Anyway, as I posted several years ago the GT 2000 along the top Kenwood, Exclusive P3a, Sp 10mk3, Denon DP 100 and maybe the Sony PS-X9 ( I think ? ) is at the very top DD vintage japanese TTs. The JVC does not belongs to this " particular/special " group or the DP-80/75.

Regards and enjoy the music,
R.


Raul, I don't disagree with you in your objective judgement of the TT101 and the DP80.  If you think of them only on the basis of what you can read about them, their build solidity, and their specs, then they indeed are not even meant to compete in the same league.  In my case, in my system, the DP80 did outperform the SP10 Mk2 but falls short of the Mk3 and the L07D.  However, the TT101 re-plinthed by me is a surprising revelation.  It's quite excellent.  I can't say how it would stack up against the Mk3 and L07D, because it's in a different system in my house, but it's excellent. JP can testify to its electronics better than I; he fixed mine.  Some products do punch above their weight.  You should know this, since you pointed out to all of us the excellence of some of the best MM and MI cartridges, and you relied on listening to judge them.  I am not here to argue about the TT101, however, and you are welcome to your opinion as always.

Dear @lewm : Look I'm not saying that the DP-80 or the JVC are not good TTs/performers because both are very good but as everything in audio exist different quality performance levels on TTs too.

Now, the real subject here is if those differences on quality performance level are " night and day ".

All those TT models we are talking here are excelent ( I include here the Denon DP-75 and maybe there are other good ones. ) and maybe when we test it in exactly the same conditions those differences on quality performance be at minimum and this is because the performance of the DP-80/75 or the JVC are really good, is almost at the top of the quality performance ladder but when we are talking of so high quality levels that try to achieve or pass to the next level does not means " huge differences " but minimal and with a very high price for it. specs with this top TTs

What really means specs with these top TTs? is it because those specs differences the differences on quality performance?
maybe not because I know for sure that I can't detect between w&f  differences on specs: 0.015% and 0.01% or between 80 db on s/n against 85 db. or higher.
At this quality performance levels those specs means " extreme " quality attention in the  design, selected parts and design execution. Example: in all top performers against the other excelent TTs even coming from the same manufacturer the TT platter is different and this sole change make per se differences.

For many many years I used only DD units from: Pionner, Denon and Technics. I was unaware of the BD experience but when I started in the " high end " DD units were forbidden on this market niche: no one talked about and the " real " high end must stay with BD TT units and my ignorance level about made that I start to buy BD TT ( big mistake ) but that ignorance from my part made that I been really exited for the " new " experience and looking for that massive BD TTs as Micro Seiki and many other that even today the people with money still are buying non-sense huge massive BD TT with out knowing that that massive designs just goes against quality performance levels: not even a kg. of pure gold is as expensive as 1 kg. of steel on those massive BD TT and I said this because that's exactly what the massive TTs buyers are buying not top quality performance.

I still own my Technics and Denons along BD ones.

Today I'm not any more at the TT hunting mainly because I'm totally convinced that the cartridge, tonearm and phono stage ( in that order ) are more important and makes the " difference " in the analog experience. I'm not saying that TT is not important because it's but at other level.

Regards and enjoy the music,
R.

I agree. I am done buying TT's except out of curiosity and my predilection for great vintage products as gadgets.