I would say no because it's the one on my iphone5 that I imagine is kinda hoaky. What difference would it make if I did though? I know it's off. I don't mean to sound curt. Thank you.
Volume imbalance
When I adjust my dual volume control I can almost never seem to get each channel to equal out. I can adjust one side but then it's just a little bit louder than the other. I believe it's the nature of the tolerances of the stepped Alps pots. I've got room for the Khozmo controls. But I'm not sure if this the way to go. I'm looking for opinions/experiences or suggestions. Thanks for any help. Would an audio taper pot be ok?
- ...
- 13 posts total
I looks like they've done something pretty shifty with wiring on these, as you have separate left and right pots, yet that no (100KAx2) indicates they are both dual gang pots. http://img.usaudiomart.com/uploads/large/602607-hard_to_find_quicksilver_full_function_all_tube_preamp.jpg Also this unit is getting very old now, and due for pot replacement, seeing they are cheap replace both, if your up to it. http://www.ebay.com.au/itm/1piece-Japan-ALPS-RK27-Stereo-100KAX2-Volume-Potentiometer-For-audio-amplifier-/201188715396?hash=item2ed7c82b84:g:Mi0AAOSwF1dUNSec Cheers George |
The Single most important component in a preamplifier if not going with a stepped attenuator go with as high quality potentiometer as you can afford - the TKD IMO is superior to any Alps one - here is a 100K Audio taper one http://www.partsconnexion.com/tkd_70897.html Best of luck Peter |
- 13 posts total