2. analog
  3. 125862-67642

LP Cleaning

Hi Guys
Need some advice on cleaning. 
I have a Clearaudio Smart Matrix cleaner. I am using Distilled Water with Spin Clean solution mixed roughly two caps (Large Bottle) to a litre. My TT is a Clearaudio Performence with a Dynavector Karat D17 and the Clearaudio Virtuso V2 both running through an Avid Pellar Phono. 
New records play fine no static or dust noise. Older records play with what seems like a lot of dust noise no matter how well I try and clean. The result is the same with both the Cartridges as well as switching to a combo of a Project TT, Project Phono and Ortofon Cartridge. 
I realise it must be my cleaning efforts. I have seen various videos on line and have tried to do exactly the same. I have also tried to clean with the Clearaudio solution that came with the machine. Can some one please advice how to get rid of the dust or better clean. Should I increase the amount of the Spinclean solution?
Thanks 
srafi
astro58go
542 posts
 
There are many threads already on this topic.

When you describe "new records play fine no static or dust noise. Older records play with what seems like a lot of dust noise no matter how well I try to clean." (This doesn't really make sense to me).

My memory says the Clearaudio has the velvet pads, right? These are static inducers. When using this type of machine, the goal is to perform as few rotations as possible. Does your TT have an acrylic platter? If so, these types of platters react with vinyl records to produce static.( These two pieces of equipment represent major dollars but are having this negative effect on your vinyl).

With no change to equipment, I'd buy a Mapleshade static gun as your current best, low cost option.

(I always steam my lps before my VPI and Audio Desk).
srafi OP
17 posts
 
Thanks Astro for the input. 
I agree that it does seem the cleaner does introduce some static. I do have a Milty Zero stat but did not use it on records fresh from the cleaning session. Dont know why but the thought never crossed my mind. I will try and clean in as few turms as possible. 
Can I use an alternative brush/pad to spread the fluid and clean the records. DIY preferred as these things are not easily available in my country. Most of these items have been bought on travels abroad. Next trip wont be for another year. 

astro58go
542 posts
 
The use of any alternate brush before the vacuum process would be counter-productive.

The (fact?) that your platter is acrylic, is of no small consequence!

Another inexpensive method would be to buy a steamer. (Around $40.00). Use a good fluid, let air dry then compare! I'm all about trying out for your self. This would involve some time & effort, but seeing how you're into vinyl, this comes with the territory.

( My memory of the Zerostat is you have to use it according to specific directions)

My Mapleshade trounced my Zerostat and is less expensive to boot!

In a perfect world, one should be able to clean their records then immediately play them. This is another reason why I like my method. There is no substitute for steaming. None!




More to discover