Thom -I agree with your comments. As well I find it interesting that the higher up the ladder you go on a TT manufacturers line - the platter becomes heavier, whether we are talking about new tables, or restoring vintage ones. My Jean Nantais Lenco has an added heavy Metacrylate mat permanently glued to the Lenco platter matter. Whether this is for noise sinking and/or or speed stability, one thing is true from my own experiences - you need good brakes. You rarely hear any forum discussions on how a platter is doing its braking ? the Platine is the only table i am aware whose platter system by design is "smart", has braking from the opposed magnets to deal with the record behavior without electronics.
When I introduced the 100 Lb Jean Nantais lenco idler into the room I was on version 6? of my DD project, and the modded TNT at the time was still running on belts used with the SDS. The Lenco raised the bar is some categories. I was impressed with the noise reduction with no suspension, solely based on damping and weight. The modded TNT matched the Lenco in tempo once thread was added, but it was not designed to run this way. . Then the Platine was added and ..... the delta so large that I just got back to listening to records. Been 3 years now I think.
Pani - imo there are too many variables with vinyl to single out one area of a turntable system whether the table itself, tonearm, cartridge, wiring, phono stage.They all play a part. You can change out a cartridge with different stylus profile and experience your symptoms. Heck, you can move your speakers, cause bass issues which will produce your symptoms. You need to get the bass right for your selected speakers set up in the room or the music will drag... period. That has been my experience especially with speakers that are able to reproduce bass to provide compression in the room.
So the turntable system has many parts and its the front end to the rest of your system. In the end it is setup error and it is all fixable. Whether someone chooses to fix the issue, or move to something else depends on them. I say this from personal experience and I think we have all made setup errors. I think you owned the Nouvelle Verdier table ?
When I introduced the 100 Lb Jean Nantais lenco idler into the room I was on version 6? of my DD project, and the modded TNT at the time was still running on belts used with the SDS. The Lenco raised the bar is some categories. I was impressed with the noise reduction with no suspension, solely based on damping and weight. The modded TNT matched the Lenco in tempo once thread was added, but it was not designed to run this way. . Then the Platine was added and ..... the delta so large that I just got back to listening to records. Been 3 years now I think.
Pani - But I ultimately felt it is not keeping up with the tempo and pitch of the music. Music seemed to be dragging a bit.
Pani - imo there are too many variables with vinyl to single out one area of a turntable system whether the table itself, tonearm, cartridge, wiring, phono stage.They all play a part. You can change out a cartridge with different stylus profile and experience your symptoms. Heck, you can move your speakers, cause bass issues which will produce your symptoms. You need to get the bass right for your selected speakers set up in the room or the music will drag... period. That has been my experience especially with speakers that are able to reproduce bass to provide compression in the room.
So the turntable system has many parts and its the front end to the rest of your system. In the end it is setup error and it is all fixable. Whether someone chooses to fix the issue, or move to something else depends on them. I say this from personal experience and I think we have all made setup errors. I think you owned the Nouvelle Verdier table ?
