Find a REGA RP3 and put a Dynavector 10X5 on it!! That is a lot of jump factor my friend for $1500 or very near...good luck.
Matt M
Matt M
Marantz TT15S1 Turntable. Any opinions 1500.00 Budget. Recommendations
I need a new turntable and looked at Rega, Pro-Ject and Music Hall. Those are all tables I can buy locally. Looking at Clear Audio but would have to be ordered. I saw a review of the Marantz turntable and see that it was designed but Clear Audio and has a 700-800 cartridge that comes with it. Trying to keep my budget at about 1500.00. Anybody have one of these that could give me an opinion? Any other recommendations in that price range with cartridge? Not opposed to used. Will be playing it through a Luxman 505U integrated. Thanks for any help.
- ...
- 16 posts total
The tables in this class are all pretty close and the Marantz will serve you well. It really comes down to where you want to put more emphasis up front - table/arm vs cart. mattmiller's recommendation of an RP3/DV 10X5 is a solid solution if you don't want to upgrade a lot in the future. If you step up to the RP6 with Exact 2 cartridge (you should be able to find one in your budget) you get a quieter table, better tone arm and separate power supply. I have one in a second system and the cartridge is a nice combo with that table and easy to upgrade in the future. |
i guess you have a problem with the looks of the Gem Dandy. As for staying in budget, however, the Absolute Sound reviewed it with a Shelter 201 cartridge. These retail in the US for $310, but can be had from Japan-based vendors on eBay for $167 (I have one). That pretty much puts the Dandy and a good cartridge in your budget range. There's also an advantage in cost of ownership: the 201 replacement stylus is a mere $100 where the Marantz/Clearaudio would be a $500-600 retip plus the several weeks without it while it's being done. The Gem Dandy has a potential advantage, being made of exclusive polymers instead of available materials. Since the designer also invented these polymers, they are likely optimized for their roles in the turntable construction for vibration damping and control. Also, the available tonearms are by Jelco, which have fluid damping and removable headshells. The latter can be really handy if you want to quickly swap, say, mono and stereo cartridges or MM and MC. Here's a review of the Marantz TT15S1. The thing is, the reviewer reviewed it without the platter mat in place and didn't realize how much it affected the sound until he was largely done with the review. Once he put the mat on and adjusted VTA, he should have reviewed it all over again, because--with what little ink he devoted to the setup with the mat--it may have fixed everything he previously criticized. |
- 16 posts total