2. speakers
  3. 126099-84284

Speakers in the 5-6K$ region & their components

Hi all,

This is my 1st post here.
I'm a long time audio enthusiast and even worked in high-end audio sales for a few years a while back, but I've been out of the loop for a few years now. I'm looking now for a new pair of speakers in the 5-6K$ range to replace my current Merlin TSM. The type I'm looking for is a 2 way 6-6.5'' speaker, preferably a floorstander. I know many brands and models and went through a lot of speakers in the past, so my question is a technical one:

I'm looking only for speakers in this range which use high end componenets. which ones are there?

I've already done some research, so here are a few examples of what I mean:

Proac in its response range is using Scanspeak D2604 tweeter (48$/unit).
PMC in its "i" series - Seas 27TFFC (45$/unit).
Spendor, "A" series - Seas 29TFF/W (52$/unit).

I can go on and also bring examples of the woofers used and more speaker brands, but I think the picture is clear. These are all quality units of well acclaimed manufacturers, but are by no means high-end units. Which are?
My research brought me this far to the following (All in my price range):

Kudos audio Super 10/Super20: Seas T29CF-002 tweeter (330$/unit) + a version of Seas W18NX (196$/unit)

Marten Form Floor: Accuton C173-6-095 woofer (over 300$/unit) + a ribbon tweeter I was unable to recognize (anyone?)

Merlin VSM (as second hand only): Dynaudio D330/A tweeter (over 400$ per unit) + Scanspeak 18W/8545-01 (173$/unit).

BTW, my current Merlin TSM is using Morel MDT30 tweeter (80$/unit) + Morel MW166 woofer (124$/unit) and sounds wonderful to my taste, despite a considerable lack of bass (being a sealed- box design). 

So, given all that, does anyone have any more ideas for speakers I should consider?
roylindenfeld
randyhat
156 posts
 
Fritz speakers comes to mind.  Most of his models have higher end drivers.  Although mostly known for his stand mount models I think he does offer floor standing versions of many of his speakers.  Although I have never personally listened to any of his speakers I have been curious to try them out.  They have received good reviews here and on most of the other audio sites.  

http://www.fritzspeakers.com

onhwy61's avatar
onhwy61
5,269 posts
 
Your premise is faulty.  For most loudspeakers the most expensive component by far is the cabinet.  Look at your Merlins, or anything by Wilson, Sonus Faber, B&W, YG, Magico and others.  They all use good drivers, some even custom made, but not necessarily the best (most expensive?) ones.  The talent of the design team overwhelms driver cost as the major contributor to a loudspeaker's final sound quality.
maplegrovemusic's avatar
maplegrovemusic
1,113 posts
 
For a long time ATC speakers used a $20 tweeter in very expensive models . The logic here is flawed .
roylindenfeld OP
11 posts
 
Thank you both for your decisive opinion, but my experience (which included working closely with a speakers & drivers manufacturers) suggests otherwise. The cabinet is very important and by no means am I looking for speakers with inferior cabinets. It all has to be good- design, drivers and cabinets- save none.
And no cabinet/design can compensate for the limits of a mediocre driver.
Simple example:
Try to play loudly an uncompressed kick drum recording on a 2 way speaker with Scanspeak P17WJ00- an inexpensive 6.5’’ woofer of decent (but not great) performance, popular with several speaker brands. The result may be the destruction of the driver. Why? because it doesn’t have enough excursion, it’s rubber surroundings are too thin and it lacks magnet power. For the same reasons, even before the breaking point, the kick drum won’t sound very punchy.
Try the same with Scanspeak 18W/8545-01 (found in the Merlin VSM and Proac 2.5), or any driver from the morel MW series, and it’ll eat it without salt and sound wonderful. Why? Strong thick surrounds, plenty of magnet power and long linear excursion. and these things cost more. In this example, the driver, given a 2 Way design, is a clear limiting factor that no cabinet or design can compensate. Same goes with driver’s bandwith, inherent distortions and what not. And I want as little limiting factors in my speaker components as possible.
So, recommendations, anyone? BTW, the Fritz’s look good and I’ve never heard about them before.
johnnyb53
3,510 posts
 
Scansonic MB-3.5 ($5300) or MB-5 ($6950)?

Personally at $5995 I'd go for the Magneplanar 3.7i. Room filling line source, speaks with one voice, large radiating area (scales up and down well), and no box, hence no boxy resonances.
More to discover