Hi Roy, I picked up some Thiel 3.7s about 6 months ago for 6,500. Brilliant speaker. You need some power, but I can't say enough good things about them.
Speakers in the 5-6K$ region & their components
Hi all,
This is my 1st post here.
I'm a long time audio enthusiast and even worked in high-end audio sales for a few years a while back, but I've been out of the loop for a few years now. I'm looking now for a new pair of speakers in the 5-6K$ range to replace my current Merlin TSM. The type I'm looking for is a 2 way 6-6.5'' speaker, preferably a floorstander. I know many brands and models and went through a lot of speakers in the past, so my question is a technical one:
I'm looking only for speakers in this range which use high end componenets. which ones are there?
I've already done some research, so here are a few examples of what I mean:
Proac in its response range is using Scanspeak D2604 tweeter (48$/unit).
PMC in its "i" series - Seas 27TFFC (45$/unit).
Spendor, "A" series - Seas 29TFF/W (52$/unit).
I can go on and also bring examples of the woofers used and more speaker brands, but I think the picture is clear. These are all quality units of well acclaimed manufacturers, but are by no means high-end units. Which are?
My research brought me this far to the following (All in my price range):
Kudos audio Super 10/Super20: Seas T29CF-002 tweeter (330$/unit) + a version of Seas W18NX (196$/unit)
Marten Form Floor: Accuton C173-6-095 woofer (over 300$/unit) + a ribbon tweeter I was unable to recognize (anyone?)
Merlin VSM (as second hand only): Dynaudio D330/A tweeter (over 400$ per unit) + Scanspeak 18W/8545-01 (173$/unit).
BTW, my current Merlin TSM is using Morel MDT30 tweeter (80$/unit) + Morel MW166 woofer (124$/unit) and sounds wonderful to my taste, despite a considerable lack of bass (being a sealed- box design).
So, given all that, does anyone have any more ideas for speakers I should consider?
This is my 1st post here.
I'm a long time audio enthusiast and even worked in high-end audio sales for a few years a while back, but I've been out of the loop for a few years now. I'm looking now for a new pair of speakers in the 5-6K$ range to replace my current Merlin TSM. The type I'm looking for is a 2 way 6-6.5'' speaker, preferably a floorstander. I know many brands and models and went through a lot of speakers in the past, so my question is a technical one:
I'm looking only for speakers in this range which use high end componenets. which ones are there?
I've already done some research, so here are a few examples of what I mean:
Proac in its response range is using Scanspeak D2604 tweeter (48$/unit).
PMC in its "i" series - Seas 27TFFC (45$/unit).
Spendor, "A" series - Seas 29TFF/W (52$/unit).
I can go on and also bring examples of the woofers used and more speaker brands, but I think the picture is clear. These are all quality units of well acclaimed manufacturers, but are by no means high-end units. Which are?
My research brought me this far to the following (All in my price range):
Kudos audio Super 10/Super20: Seas T29CF-002 tweeter (330$/unit) + a version of Seas W18NX (196$/unit)
Marten Form Floor: Accuton C173-6-095 woofer (over 300$/unit) + a ribbon tweeter I was unable to recognize (anyone?)
Merlin VSM (as second hand only): Dynaudio D330/A tweeter (over 400$ per unit) + Scanspeak 18W/8545-01 (173$/unit).
BTW, my current Merlin TSM is using Morel MDT30 tweeter (80$/unit) + Morel MW166 woofer (124$/unit) and sounds wonderful to my taste, despite a considerable lack of bass (being a sealed- box design).
So, given all that, does anyone have any more ideas for speakers I should consider?
- ...
- 84 posts total
Hi Roy You are so right about speakers built with .50c tweeters etc. Take a look at the Wilson Benesch Square 2. Nice floor stander. The mid/woofer is about a $500 piece manufactured in house, literally So much engineering not only in their drivers but the enclosure as well. http://wilson-benesch.com If you dig a little you can find an expanded view of that mid/woofer. Exceptional. Best Jim |
To those who are sure I'm making a great mistake etc., I’ve said it before and I’ll say it one last time: I’m not in this since yesterday. I’ve owned myself over 20 pairs of speakers, worked in hi-fi sales for several years and am well acquainted with driver & speaker manufacturers. According to my experience, a speaker is nothing like a painting, a musical instrument or a work of art. It’s like any other technical device, same as an amp or a car. And no design, ingenious as it may be, can surpass the inherent limits of sub-par components. Take a look back at my kick drum example. there are things that a basic driver simply can’t do. Your experience may be different, and that’s fine. But that wasn’t my question, and I WILL NOT put my money on expensive speakers made from cheap parts UNLESS I have first ruled out those who offer a much better parts/retail ratio. |
- 84 posts total