Taralabs cables

The Muse Interface



TARA Labs has been at the forefront of design & technology for thirty years. In that time, TARA Labs has been credited with numerous “first inventions” in the field of high-end audio cables; Rectangular Solid Core (RSC), vacuum dielectric technology (VDT), and now we are introducing the advent of a fantastic new product known as: The Muse Interface.If you could improve the sound of your audio system, what would that be?Would it be a more expansive soundstage, less glare or stridency, more musicality?There are literally thousands of component models available in the audio marketplace. And many of these components when combined together, will not offer that symbiotic relationship and sound that audiophiles are looking for? TARA Labs has always been at the forefront of technological advances in this industry, and our high-end audio cables have brought many a system close to “perfection.”In an effort to expand our product line to bring audiophiles closer to the “live-sound”, TARA Labs is now introducing The Muse Interface Sound Enhancement System. You can now add this incredible technology to your audio system and improve your sound like never before! And it works with any audio system or audio cables regardless of brand. The Muse Interface can be connected to any RCA or XLR cable termination, and what you’ll experience is a lower noise floor, wider sound-stage, more presence, mid-range warmth and richness, as well as enhanced musicality without sacrificing detail and high frequency extension. A sound that is more coherent and natural, bringing you closer to the “live-experience” like never before!*The Muse Interface is especially recommended for systems that have wide-bandwidth electronics (with limited filtering*), or with systems that use loudspeakers that have a tonal balance that emphasizes the high frequencies, including systems that are slightly etched sounding or overly detailed, perhaps with a sense of glare or stridency. In addition, we have found that when used with high-end audio systems, the effects become more apparent. Meaning the better the audio system, the closer you’ll become with that “perfect live sound.”The Muse Interface is unlike traditional shielding methods or filter networks. Even complex shielding methods still remain in proximity to the conductors, thereby distorting the audio signal. Filter networks in boxes at the ends of the cables often contain low quality resistors, inductors and capacitors to perform the filtering. These reduce RFI/EMI in the cable itself by being soldered in series and parallel between the signal conductors. This alters the integrity of the signal, in particular, the higher order harmonic structure. Using The Muse Interface, RFI/EMI is dissipated and absorbed within the Muse technology. This function occurs in isolation from the signal conductors. The signal path is not cut and fitted with additional components. The Muse Interface is extremely effective in eliminating the noise of RFI/EMI without the attendant high-frequency anomalies of filter networks. This translates into a sound that is closer to live than ever before.

Making Sense of….Gen 3 ConductorsTARA Labs, Inc. has just announced the introduction of its Generation 3 Rectangular Solid Core® conductor, to be used exclusively in its state-of-the-art interconnect cables.
The Gen 3 conductor has an increased bandwidth and high-frequency extension that makes it unrivalled in important test measurements and listening tests.
The new Gen 3 conductor has the same current-carrying capability of a 28 gauge conductor but has the high frequency linearity of a 40 gauge conductor.
TARA Labs' Matthew Bond explains why this is possible: “In a conductor with a rectangular profile, there is a huge reduction of ‘flux-linkage’ or ‘coupling’ of electromagnetic lines of force. These lines of force are created as the signal (music) passes through any conductor.” Bond said further, “In a round conductor there is a large center that tends to roll-off or attenuate much more of the high frequency information … this does not happen in a Rectangular Solid Core® conductor”.
The new Gen 3 Rectangular Solid Core® conductor is smaller than the current Gen 2 conductor used in most of TARA Labs’ audio cables. The Gen 2 conductor measures approximately 25 thousands of an inch wide and 12 thousands of an inch in height. The Gen 3 conductor is about 66% of the size of the Gen 2 conductor, and that it is Super-Annealed™ to increase its conductivity.
Both the Gen 2 conductor and the smaller Gen 3 conductor are said to be Eight-Nines™ pure copper, which is 99.999999% pure. TARA Labs’ trademarks for this technology are 8N™ and SA-OF8N®. SA-OF8N means Super Annealed – Oxygen Free 8 Nines copper. The term ‘annealing’ refers to the method whereby a conductor can be made softer and more conductive.

Hi jafant,  I've studied your Thiel speaker's,  I  believe the krell 400xi would be lean on the bass, neutral,  maybe bright on your speaker's,  the kav 300i is not as resolving on the top end, but it is warmer sounding with better bass!, the kav 300i sounds good on vocals,  to me more musical for your speaker's,  the 400xi needs warm sounding speaker's,  your Thiel speaker's are far from warm,  extreme resolution with extreme resolution can be fatiguing,  it's my opinion that the krell kav 300i will give you a nice balanced sound,  and better fit, 😉

Jafant,

I once owned the Krell 300i integrated. Had forgotten. A very nice piece and perhaps a "taste of Krell", but not ultimately representative of Krell's finest products IMO. You already know my opinions on good SS amps...

Best to you,

Dave

Hi dlcockrum, Do you have a krell amplifier now?