Has anyone tried these stunning new CPT power cord?


   Considering the many, many brands of power cords I've tried in my very well accomplished high-end system, I have never been so impacted by these Core Power Technology power cords. Within a very short period(15-20) minutes my system literally came alive. Soundstage opened wider and deeper. The background became dead silent, space between instruments and stage members were more focused and everything sounded cleaner and musical than ever. My highs had a glorious crispness and symbols shimmered. Midrange through my 2" horn became more dynamic and punchy. My 15" bass driver tightened and dug low with great control. My Rel G1 which is a fabulous sub on its own but with a CPT 150 on it is another story. Running high pass from my sub to my Audiozen Noah amplifier, music depth is just stunning. Lower end bass is authoritative and clean with solid grip and impact. 
   My experience with these power cords is truly magical. The scary part of the above is I only have one 150 on my sub and one 300 from my wall to my 6 outlet bar. I still need 3 more to complete my system. I could just imagine the level after that...In closing, I cannot emphasize enough to try one of these in your system. I CANNOT and WIIL NOT take these out as they are that good. But hold your jaw, cuz what you've been listening to will just become real after Core Power Technologies. 

Cheers....and let the tapping begin.......



128x128bacardi
has anyone tried connecting the equi-core 1200w and equi-core 300w in series? is there any slight improvement?
i'm thinking of buying a big equi-core 1200w and connecting the smaller equi-core power cables(which i presently have 2) DIRECTLY into one of the receptacles.(1200w)
I have 2 equi=core 300 plug into a passive Weizhi PRS-6.

This is the same cable on a equi=core.  Emerald Physics branded Power Cable that you can buy and use with a Power=Core 1200w.
@philipwu

Hello - we have in fact begun shipping 1200’s and 1800’s. I believe several folks will begin to see these in the next several days. We have been real pleased - dead quiet and bottomless well of energy (as it’s been described)...

You can of course directly connect E=C 50/150 or 300 to any of the Balanced Outputs of the 1200/1800.

Here to help...

++1.720.317.9141 or corepowertech@outlook.com

Best wishes,

Mark

Mark,

I'm think of using the 1800 for my amp and plug the 300 into it for my digital (which I use with a power strip).

Would this provide better sound quality for the digital? Or would I still be better off using the 300 and the 1800 on different dedicated circuits?


@corepowertech
so by cascading the balance transformers , any chances of a ground loop or ground hum ? (assuming all other connecting audio gears have good ground wiring practices, no unorthodox floating of ground or otherwise..)
Thanks!
-phil