Do equipment stands have an impact on electronics?

Audiopoint wrote,

"When a speaker is placed on springs, everything moves about and in situations depending on volume and room pressure level, speakers can also move counter to Earth’s rotation. Everything moves - the chassis, drivers, diaphragms and voice coils move freely - left to right and front to back.

Since everything is moving around how does one relate to or measure for driver time alignment?

If a speaker fires from different angles and/or locations while moving, does that affect driver dispersion patterns?

How do the internal moving parts of a loudspeaker function when subjected to constant flexing?

Speaker testing is usually done from a fixed foundation and position - not a moving plane, so how would spring movement affect the testing in anechoic or other studio environments?

if the iso system is properly designed any potential drawback will be outweighed by it’s advantages. Springs under (heavy) speakers - very stiff springs - would be extremely resistant to all motion except vertical motion due to their stiffness and that vertical motion would be very small in practice, again due to their stiffness. So you can ignore the motion using springs with speakers.

Audiopoint wrote,

"We never considered Earth’s crust motion or seismic forces to be part of our technology, research or approach to product development as we are focused on improving the ’audible’ musical instrument and recording/playback sciences."


That’s not my fault. You should consider everything. I considered everything. I think everybody should.

audiopoint also wrote,

"It would appear in order to provide you any concept of understanding related to our technical approach or why our products perform direct coupled to Earth without the negative effects from inaudible seismic interference would have to result in a product audition."

Im not criticizing your product or your approach. Other than to say that as far as vibration is concerned your approach is not complete.

then Audiopoint wrote,

"Keep to your seismic storyboarding as it delivers a simplistic concept, provides a level of believability and will attract an audience so you can retail your lengthy list of all the different little things you sell."

OK, snarky comments aside, getting back to reality for just a moment, I have also addressed the induced vibration and the acoustic produced vibration just as you claim to have. In fact, my techniques, just judging from your own word, are probably superior in that regard.

Then an audiopoint wrote,

" I have no doubt you will continue to stay on the seismic issues telling companies like ours that we are missing the boat and should go back to school only because Ligo and Kait says so."

Hey, I’m game if you are. I like this little game. I don’t tell anyone what to do. Now that you mention it school is a terrible idea. Remember, education is what’s left after you subtract out what you forgot from school.

Finally Audiopoint wrote,

"We do not listen to Ligo. We do not hear electron microscopes. We do not listen in anechoic environments and we certainly do not hear our houses shaking from seismic whatevers, so what exactly are we missing?

I never said we did. We don’t listen to Audio Points either. Follow? What are you missing? Give me a few days to think about it and I’ll get back to you.

have a nice day

dl - I have a couple of comments on that measurements pdf:

1. The methodology is incompletely described, and there is no assessment of the accuracy, repeatability etc. of the Geophone sensor among other things.

2. Worst is likely the complete absence of sample sizes and any statistical analysis

There are several other problems with it, but there is no point in going on.

It could not be published in an engineering or scientific journal.

Geoff,

Like a displaced spring on a '58 Edsel your storyboard has sagged with age. 

Furthermore let go your LIGO as it has nothing to do with anything you make.

As you almost stated above..take a few days to think about it  and get back to us.


Tom

theaudiotweak
1,401 posts
11-06-2016 1:36pm
"Geoff,

Like a displaced spring on a '58 Edsel your storyboard has sagged with age."

Good one, Tom. You're on a roll.

"Furthermore let go your LIGO as it has nothing to do with anything you make."

Have to disagree there, Zippy. LIGO uses springs. 

"As you almost stated above..take a few days to think about it and get back to us."

Give me a few days and  I'll get back to you. I promise.