Do equipment stands have an impact on electronics?
theaudiotweak 1,401 posts 11-06-2016 1:36pm "Geoff, Like a displaced spring on a '58 Edsel your storyboard has sagged with age." Good one, Tom. You're on a roll. "Furthermore let go your LIGO as it has nothing to do with anything you make." Have to disagree there, Zippy. LIGO uses springs. "As you almost stated above..take a few days to think about it and get back to us." Give me a few days and I'll get back to you. I promise. |
Randy, I agree. And to answer Dave as well.. Are we listening to a piece of music or the before and after affects of a pogo stick? Plus it will work as a really good plug and not as a drain. Some energy has to be moved out from the source with speed and in an orderly fashion. If the internal interference lingers to long it will become a part of the original signal. Reminds me of so many others, one in particular...same concept slightly different materials. Tom |
dlcockrum 452 posts 11-05-2016 7:23pm Hi Tom and Geoff, If you would be so kind, could you comment on measurements pdf within the link I posted above: http://www.solid-tech.net/products/discs-of-silence-4537455 That appears to be what I would expect from a low pass filter. Effectiveness of isolation rises as frequency rises, e.g., 88% at 20 Hz, 97% at 150 Hz. No surprises there. Also, good performance in z direction and x-y plane. Nice! |
| Post removed |
