Thiel Owners


Guys-

I just scored a sweet pair of CS 2.4SE loudspeakers. Anyone else currently or previously owned this model?
Owners of the CS 2.4 or CS 2.7 are free to chime in as well. Thiel are excellent w/ both tubed or solid-state gear!

Keep me posted & Happy Listening!
128x128jafant
unsound...

You've been more than a great source of information regarding my,  and other members Thiels here.  In fact you were the first to make me aware of the continuing service on their legacy products which helped me rebuild one of my midrange drivers on my first pair of 3.5's.  You also explained why 3.5's can be driven with a lighter weight tube amp due to the speakers more consistent load presented to the amp...

Tomorrow morning I'll be s'perimenting with the tape aspect suggested with my BAT in order to gain the full benefit of using XLR connects between that and the Pass,  as a result keeping the Thiel eq in the chain.  I will also attempt the same with the Khozmo passive,  albeit with unbalanced connects.  

Thanks, guys.





^You can use two short (1/2 meter (?) lengths of RCA) lengths for the eq tape loop. After which you might very well find that less expensive runs of balanced interconnects out perform more expensive single ended interconnects. Heck, a good portion of the expense of the BAT and Pass is due to the extra parts and labor of their balanced design that makes them perform as well as they do.

^i still recommend doubling the 8 Ohm power rating when using a tube amp compared to a ss amp with speakers like your 4 Ohm minimum 3.5's and even more with later models that have impedances that drop even lower. Personally I prefer quality ss with their inherently superior frequency linearity and subsequent timbre accuracy. Others might prefer the the even order harmonic distortions of tube amps over the odd order harmonic distortions of ss amps. Pick your preferred poison :-).
Post removed 
oblgny, Of course as I alluded to earlier, even better, if you could find another 3.5 eq, it shouldn't be too difficult for a qualified tech to convert your now 2 eq's to balanced mono configuration. Then you would avoid the conversions, extra  lengths of interconnects, have greater stereo separation, and avail yourself to extra inputs/outputs of your BAT.
Another option would be to find a digital room correction device with equalizer function and balanced inputs and outputs. The additional advantage of which is that you could tune your speakers bass output to the your specific room rather than Thiels anechoic one. Something I've been considering for some time. Unfortunately I have yet to find such a budget friendly device with equalizer functions that expand  to the 12 dB range that the Thiel unit goes to.