2. cables
  3. 126355-10176

New dedicated line & outlets sound worse, not better- HELP!

About 3 weeks ago I installed a new dedicated power line from my breaker box to the outlets for my stereo set-up.  I used 10 gauge Romex, a new breaker in the panel, and also installed two new Porter Port cryo'd outlets.

My system is comprised of the following:
Gallo Strada speakers
M&K MX-80 sub
Parasound A23 amp
Consonance Cyber 222 line stage pre
MHDT Stockholm 2 DAC
Audio Philleo converter & Pure Power module
Clear Day double shotgun speaker cables
Silnote Epirus USB cable
Silnote Morpheus IC from DAC
Audience PowerChord from DAC
spiked maple stands for pre and amp

So my concern is that my system sounded just about perfect prior to the installation of the dedicated line and outlets- very clean, open, and detailed, yet also a musical and relaxed sounding. I figured the new dedicated line and outlets would just bring more of all of the good things I was hearing.

Instead, following it's installation, everything sounds a bit edgy and fatiguing to my ears. Soundstage depth and separation are improved, as well as bandwidth, but I literally cannot listen for more than 30 minutes before I get irritated. The treble seems too aggressive, which I'm very sensitive to. And there seems to be a slight veil over everything- just not as open as before.
Do I need to just be patient with break-in of the line and outlets? I've heard it can take a month or more for things to settle down. What are others experience after installing a new line and/or outlets?
Any insights or possible issues I might have overlooked are much appreciated!
Lincoln
lincnabby
verafiaudio
729 posts
 
@jea48 

Our Hubbell Outlets are not GFCI - we do have a fast acting Circuit Breaker in place - works well. 

Our products are not currently UL or CSA (or CE)... 

Next year we will apply for CE. 

Thank You,

Mark
jea48
4,413 posts
 
Our Hubbell Outlets are not GFCI - we do have a fast acting Circuit Breaker in place - works well.

At the receptacle/s is there a difference of potential, voltage, from either Hot contact to the "U" shaped safety equipment ground contact of 60Vac?

If yes, I believe, that meets the definition of a separately derived 60/120Vac grounded Technical Power System.

Jim 

verafiaudio
729 posts
 
@jea48 

While I certainly do appreciate your question and your desire to learn more about our product I never want to take the position of "that's an internal issue"... I can share with you that we in fact do put our real Balanced Power and without writing a term paper here perhaps you might enjoy a 10 minute conversation with John Levreault our Lead Designer of this product. John has been around almost 50 years in this industry and is responsible for some of the best analog and digital designs around. I could surely ask him to phone you up and discuss our topology which is Balanced. 

My e-mail is corepowertech@outlook.com

My ask is that if we do this - you then offer your report as such here. Good it would come from you and not from me. 

I could simply answer your question - but as you've asked... this might be a nice exercise...

Best wishes,

Mark
Post removed 
More to discover