2. analog
  3. 126943-22211

Cartridge recommendations

Just had an unfortunate accident. While putting my Shelter 501 mk 11 cartridge on a new Audiomods arm, one of the electrodes on the cartridge snapped off. Almost impossible to repair.

I've been very happy with that cartridge. Bought it second hand for $500  
off Audiogon seven yrs ago, still going strong. Can't afford a new one, but if anyone has a used one in good condition, I'd buy it. Or are there any comparably good sounding carts people would like to recommend?
houseofhits
sunnyjim
927 posts
 

To raymondo: What outboard phono pre-amp allows  loads up to 400-500 ohms to maximize the Denon 103's potential??.  I have only  seen  loading  standard options of 47 ohms, and 100-200 Ohms but no higher.

Our colleague "Mofimadness" has a short list of phono pre-amp but not on this thread. . Look for his response to a thread about phono pre-amp..  But let's hear from you first.   Thanks

 

pbnaudio's avatar
pbnaudio
1,613 posts
 
Our Liberty B2B-1 can be set to any desired loading 500Ohms is one of several standard selectable load settings, any customized load can be requested on ordering of this little gem.

The Denon DL103 and 103R are very nice cartridges for what they are asking for them, and properly set up and in the right tonearm they are very musically satisfying - there is a reason they are still making them after 40 - 50 plus years. The 103 in the very affordable Jelco SA750 Tonearm are is a stellar combination for the price.

The only difference on the 103 and the 103R is the coil wire the 103R has a "6 nines" wire the 103 a lesser quality wire of the coils.  The stylus shape is the same on both : 16.5 Micron round tip.

Good Listening

Peter  

oleschool's avatar
oleschool
722 posts
 
My musical fidelity mx vynl is fully adjustable on the fly . 
layniesdad83
28 posts
 
I have an audiomods classic 4 about 5 years old.  Great arm, especiallly for the price-But the cartridge tags he uses are too small for anything, and they are cast. they won't spread so something has to break; I had a tag crack.  Took tags off my rpm-4 and put on arm.
118866's avatar
118866
3 posts
 
I llove the AT 95E OR EX very capable and cheap to replace..I have a Linn Basik mk 1 turntable with a B2  Akito arm with leak tl12 power amps
a msical fidelity iclic pre and spendor s6e speakers..
More to discover