New Townshend Rock 7 owner

alonski,

Hi,

 In my research, the Rock 7 platter is of a substance called "plastisine"(spelling may be off).

It is indeed a material to mimick the vinyl record. I have had several "acrylic"  platters in house, this is different. Though I've yet to hear it, it is of a different feel, and overall weight as well. Interestingly, as opposed to my VPI's heavy platters, this fairly lightweight platter w/ no ball bearing, spins very, very freely. Almost like one would expect from a heavy, especially heavily outer weighted platter. (This seems to be just one more positive attribute of a very well thought out design!)

I had recently been looking into Origin Live products for a tt project I have going on. In researching the belt, I've found nothing but positive remarks. I obviously, cannot remark on anything yet. It is in my thoughts.

One of my (need to own) cartridges is the K Purpleheart. I'd love to know what viscosity of trough fluid you use with that cart?

bdp24, alonski,

One of the issues I'm running into (without even hearing it yet) is when I get the platter level, I then put my level on the arm pillar, it is off level.

This is just one aspect, (similar to using an ET arm, and thankfully I have that knowledge going in) that makes taking time at first, that benefits the actual, later experience!

Slaw
Congratulations on obtaining your Rock 7 table.  I purchased the Rock 7 2 years ago with Metlin motor upgrade and I continue to he stunned by its performance.  Damping at cartridge makes sound so much cleaner with gery natural tight bass clear highs and excellent dynamics.  Best TT setup i"ve experienced.  Interested to hear your comments concerning VPI. Good luck
Nick

Hey Slaw,

I use the original trough fluid that Max supplied, which seems to work really well for me.

As for leveling issues, I bubble-level to the platter and the arm board surface. I use the smallest, lightest bubble level because on a suspended TT like this, even the weight of the level itself can slightly affect the reading, especially if you don't have a bubble level that sits dead-center over the spindle and have to level to another spot on the platter...

The Purple Heart/ Rock 7/ Helius Omega combo is magic. I had already been floored by the Kiseki when I installed it on to my TA Excalibur 3, but not very long after that, I took a deep breath and upgraded the tonearm to the Omega. The Helius took the sound to yet another level.

Every step of the upgrade has been significantly beneficial to the sound of my system, which is all I really care about. Most audiophiles that audition my system are blown away by the ease, naturalness, and dynamics that this immersive "you are there" musical experience creates.

My analog front-end set-up is roughly $12K now, and when comparing it with other source set-ups in its price range, there is not a contender I could find. Even set-ups at five times the price have a hard time beating this ingenious cartridge-damped technology. Just throwing money at a system won't make it musical... everything needs to play together well in a synergistic way. I consider this front-end to be one of the best values in high-end audio today. it feels good to be done upgrading for now and just enjoying my music.

Just my $0.02

nsp,

I will comment on the differences at a later date. Thanks for your comments.

alonski,

I'm using a MANA bubble level. I don't see the bubble change enough when I place it on any surface for it's weight to be a factor. I'm having to make some shims out of paper to get the arm pillar level when the platter is level. What I've learned when leveling the table is to get your tt support platform level so I don't have to adjust the stock (feet/springs). Using the counterbalance weight solely for the leveling is optimal as the tt remains more stable. Almost there. I couldn't wait any longer and did a rough cartridge/alignment and quick listen. Without the cart being perfect and no trough fluid, I could hear a basis for very good things to come. The motor speed is a little fast. I believe I need a new belt. I set the motor further out that recommended to get the speed close to correct with my Timeline.

Thanks.