How do I power my 800D(3)s


Hi folks

I am new to this, but trying to learn fast!

I have long been a fan of Bowers and Wilkins and I am lucky enough to buy a brand new pair of 800D(3)'s.  I have recently built a new house, so now have enough space for this very special purchase, which I plan to make in the next month or so.

I want to run a two channel system in our living room so it's a pretty simple layout.  Can anybody give me some advice, so that I get the best out of the speakers.  Will a Pre-Amp, and an Amp be enough with a Streamer?  Do I need two amps?  

Can you also advise on the best brands to look at.  I see that B&W tends to show the speakers off in thier demo's with Classe?  Any thoughts?

Thanks in advance.

Matt
128x128matt_gf
For the  tube designs the Mastersound PF 100 limited monoblocks, or Jadis 120 s with EL 34 s only! the Jadis PA 150 is great too, but make sure to get it with EL 34s (Golden Lions KT 77s are alrite)... However with the Jadis you might deal with reliability issues, thou the new circuit is much more reliable, the company has somewhat spotty service in USA, but if you want to duplicate your last autumn opera gala premiere experience at the MET, these three would be my top choices.....
Rogue Audio Apollo dark model monoblocks are also exceptional and reliable design..again , try to get them with EL 34 .... VTL MB 185 are also supremely musical, they are EL 34 designs, and are auto biased  ... If you hear VTL s with your speakers properly setup, with good source and Music First top of line passive preamp ..Sublime ....
Symphonic Line Rg4 monoblocks
Yes these could be nice also, so long as they're not just bridged stereo ones.
As they are BJT (bipolar) output devices. Not much independent tests done to see if they can almost double all the way to 2ohms, but they seem to have the ingredients for it to happen. Again so long as they're not just bridged stereo's

Cheers George
Stereo Exchange in NYC has your 800D3s set up with Rogues I believe .... if they switched the amps and run them with MAcintosh or Devialet, these will sound mediocre at best .... Your speakers are fantastic ..Easily top 5 , price be damned !
Tubes??? Not the best with this kind of impedance and -phase angle load in the bass kot.

The 3ohm!! load between 80hz and 800hz is bad enough.
But the 4ohms with -55 degrees of phase angle is an aprox epdr of around 2ohms!! at 70hz

http://www.stereophile.com/images/616BW802fig1.jpg

Cheers George