Magnepans


I'm kinda new to the plannar/magnepan world, but I am really interested in trying out a pair after all the reviews I've been reading. From what I understand these speakers are quite power hungry. What is the minimum I need to properly drive these? 
I currently have a VAC Avatar integrated tube amp. These are the stats:
Type: Integrated vacuum tube amplifier with MM phono stage and home theater (direct power amplifier) mode.
Tube Complement: two 12AX7 low noise (phono), two 12AX7 (line stage), three 12AU7/6189A (power amplifier), and four EL34 (power amplifier)
Options: Remote control for volume (motorized direct control) & mute
Power amplifier ("Home Theater" direct mode):
Output matching: 4 or 8 ohms nominal
Power output: 60 watts/channel ultra-linear; 27 watts/channel triode
Frequency response: 9 Hz - 35 kHz +0 / -0.5 dB, 3 Hz - 71 kHz +0 / -3.0 dB
Power bandwidth: 11 Hz - 63 kHz + 0 / -3.0 db ref. 50 watts
Gain: 25 dB ultra-linear; 23 dB triode
Residual noise: 1.5 mv at 8 ohm output
Channel separation: -72 dB @ 1 kHz; -60 dB @ 10 kHz
Line stage preamplifier:
Gain: 24 dB
Maximum input signal: Infinite (attenuation precedes line stage)
Noise contribution: Approx. 0.1 mv at power amplifier output 
THD contribution: Approx. 0.04% 
Tape output: Unity gain from selector, non-inverting 
Phono stage preamplifier: 
Gain: 37 dB (measured at tape output)
MC phono stage in place of the MM optional 
Residual noise: 3 mv at output (S/N ratio approx. 69 dB) 
Overload: 117 mv @ 1 kHz = 8 volts RMS output, 460 mv @ 10 kHz 
Frequency response: RIAA +/- 0.25 dB 
Notes: Does not invert absolute phase. 

Anyone know if these will do or if I'll have to upgrade? Love the tube sound . . . will I need to go solid state for Maggies? Thanks for putting up with the noobie question :) 
the_nature_boy
natureboy,

stewart0722 stated:

" Whoever said that the 2.5 sounds better than a 1.7i needs to go hear the 1.7i (and he said he had not)......I have heard both of them (in the case of the 2.5 though, it was a quarter of a century ago!)"

     Focusing on what is the best solution for you, I think stewart made 2 good points in his last post and I want to add a 3rd point:

1.  I actually have not listened to the newish 1.7i Magnepans  and stewart may be correct that they perform better than the much older 2.5/R. They have also received extremely good reviews from owners and professional audio reviewers. The best approach is for you to demo them and decide for yourself. 
 
2.  He's also correct about the 2.5/R becoming 30 yrs old next year.  There have been issues with older Magnepans delaminating (the glue ages and the bond holding the magnets to the mylar panels weakens or fails.  I bought a used pair of IIB in the mid-1980s that this eventually happened to and they made a flapping sound when played too loudly.  You'd need to either demo the used 2.5/R carefully before purchasing or, worse case, be willing to send them to Magnepan for repairs.  Magnepan switched glue vendors around the mid 80s  and believe this mainly
remedied the issue but there are still a lot of their speakers out there that did, or may, delaminate.

3.  Magnepan has a special promotion on the 1.7i until 1/1/2017. Ever bought yourself a 'potential' $2,000 Xmas gift?  If you don't have a nearby Magnepan dealer, Magnepan will ship a pair to your house and give you 30 days to try them out.  If you  don't want to keep them, you can send them back for a full refund (with free shipping both ways) and they'll give you $100 just for trying them.  The link below lists the details:

http://www.magnepan.com/model_17

     My current thinking is that the 1.7i is probably your better solution since they're likely to perform better, will be brand new with a full 3 yr. warranty, are relatively inexpensive,
you get to choose the trim and cloth color that you like best, they look beautiful and are just a touch smaller than the 2.5/R ( the 2.5 are 22"W x 71"H x 2"D and the 1.7 are 19"W x 65"H x 2"D).

     The original 1.7 are not upgradeible to the "i" version like the 3.7 are. Neither  the 1.7 or 1.7i  have the 'true ribbon' tweeter (and it's not an option) but they're 1/3rd the price of the 3.7i.  Yes, the 3.7i will perform better than the 1,7i. Will the 'true ribbon' tweeter and better bass performance of the 3.7i be worth the additional $4,000 to you?  You need to visit your local Magnepan dealer to find out for yourself.  A good dealer will allow you to take demo pairs to compare in your system.

     If you agree that newer Magnepans are a better choice, I think your only remaining decision is amplification. I'm having a little trouble here because I don't know your budget.   Here are a few thoughts/options until you tell us:

1. No matter which Magnepans you ultimately decide on, try them out with your VAC Avatar first and only explore other options if you're not completely happy with the combination.
2. Use your VAC as a pre-amp and pair it with a high- powered  amp; probably best to try different typologies to determine your preference (tube,class A, A/B and D)
3. In my opinion, to get the best results out of any Magnepans, the best method is to pair a good tube pre-amp you really like the sound of with a high-powered  stereo amp or mono-blocks of any type (tube or solid state). If sound quality is the top concern and budget is not, there are too many good choices to mention only a few.  If sound quality is important but cost is too, then we'd need your budget to offer useful suggestions. The options become more limited as your budget decreases but I think you'll still receive some good suggestions.

Thanks,
Tim


I'm curious as to what the least expensive amp to drive 3.7i would be...
Hi.. I have Maggie 1.7s that I am driving very nicely with tubes..a Primaluna Dialouge Premium @ around 40wpc utilizing kt88s in the amp. This is the best my Maggie's have sounded. Previously, I used a vintage rebuilt100wpc HK 19 amp (solid state) then went tubes to a Cronus Magnum (100wpc) still searching I upgraded to the class D Rogue Pharaoh which was a major improvement in sound over all previous amps and still sounded like tubes with some nice black plates in 12au7 preamp inside (the Pharaoh was  185wpc) But the Primaluna is by far the best sounding, best detail and has the most slam...and it's the lowest wpc of the amps I've mated to the Maggie's. I'm guessing the Primaluna Dialouge HP would be even better.  My two cents:) good luck!

I had Atmasphere M60's with Maggie 3.6's. They work fine, but I wouldn't recommend it, or tubes in general with Maggies. They don't need it, just get a good SS amp of some kind which will be an easier setup IMO. 
I own MG1.7's and run them off a Prima Luna tube integrated which with KT150's has about 60 watts. The room size is 600 sq. feet. About the only time I have a power issue is with low bass, you do need more wattage for "growly" bass but  given the speakers bass roll off point I suspect its a better approach to buy a fast powered subwoofer and use a electronic crossover between pre and amp to feed the sub.  I'd suggest using a tube pre section but go solid state for the speaker  amp because its hard to make tube amps "fast" and deliver higher wattage.