I have heard from someone that his 3d arm warped over time. Apparently the cheap plastic bends or warps over time from ambient heat.
Confessions from a VPI owner of some 30 years
I would like to start with a humble apology to the OP of a thread I recently (overtook) for personal reasons. smrex13, I apologize to you and hope your audio journey going forward is joyous!
To donvito101, I made my remarks personal and for this I apologize.
I checked for remarks from yesterday on the "VPI Prime noise issues" (2 threads, why, I don't know) . I still find it odd that VPI did not remark on smrex13' original thread, only to his last thread that ended, "not VPI's fault".
I've had a couple of issues since purchasing my VPI Classic 3 SE Sig. one year ago. I sent, (through my dealer), an initial question about the arm tower's operation on Feb 2016. I was told it would be forwarded to VPI. As of today, I've not received one comment.
I've recently, in the past 3 months, had a vibration issue through the 3D arm when the SDS is set at 33rpm. It is not noticeable at 45 rpm. I feel it through the finger lift.
I've tried oiling the motor, cleaning the belt & new talcum, the spindle bearing is just like recommended with the proper grease etc...
I relayed all of this through my dealer who asked for pictures and I sent them. This was two weeks ago. As of today, not one word. Because of my last question through my dealer in Feb w/ no response, I'm a little weary.
OK. So, my position is.... I should go through the proper channels. The dealer, right? VPI has their sales set up through a dealer network. This, I assume, is to take a burden off of them so they can be focused on manufacturing?
We/I/ you, pay a premium for this? I assume it's around 100% added to the actual cost of manufacturing. So, if I have an issue, I should follow the way VPI has their dealer network set up and take my concerns to the dealer. If this is not the way things should work, why then, doesn't VPI just sell directly? We/me/the end user could save BIG BUCKS.
That's pretty much the whole issue. I have no idea why VPI does not want to make any effort to settle this issue.
Cheers!
To donvito101, I made my remarks personal and for this I apologize.
I checked for remarks from yesterday on the "VPI Prime noise issues" (2 threads, why, I don't know) . I still find it odd that VPI did not remark on smrex13' original thread, only to his last thread that ended, "not VPI's fault".
I've had a couple of issues since purchasing my VPI Classic 3 SE Sig. one year ago. I sent, (through my dealer), an initial question about the arm tower's operation on Feb 2016. I was told it would be forwarded to VPI. As of today, I've not received one comment.
I've recently, in the past 3 months, had a vibration issue through the 3D arm when the SDS is set at 33rpm. It is not noticeable at 45 rpm. I feel it through the finger lift.
I've tried oiling the motor, cleaning the belt & new talcum, the spindle bearing is just like recommended with the proper grease etc...
I relayed all of this through my dealer who asked for pictures and I sent them. This was two weeks ago. As of today, not one word. Because of my last question through my dealer in Feb w/ no response, I'm a little weary.
OK. So, my position is.... I should go through the proper channels. The dealer, right? VPI has their sales set up through a dealer network. This, I assume, is to take a burden off of them so they can be focused on manufacturing?
We/I/ you, pay a premium for this? I assume it's around 100% added to the actual cost of manufacturing. So, if I have an issue, I should follow the way VPI has their dealer network set up and take my concerns to the dealer. If this is not the way things should work, why then, doesn't VPI just sell directly? We/me/the end user could save BIG BUCKS.
That's pretty much the whole issue. I have no idea why VPI does not want to make any effort to settle this issue.
Cheers!
- ...
- 98 posts total
Who can possibly say that selling direct would not lower prices? Roger Sanders sells direct and he is 50% cheaper because there is no dealer network/mark up. The days of shoddy customer service are gone. Jeff Rowland will take my calls directly or from my dealer and I get awesome service. Roger Sanders takes calls from people I gave my old gear to. VPI is cluelsss. I called for help on an armboard and was told to call my dealer. Thats pathetic service VPI. |
cerrot I called for help on an armboard and was told to call my dealer. Thats pathetic service VPI.It sounds to me like VPI wants to support its dealer network. That’s a great thing! And VPI has mail-order dealers, such as Music Direct ... and MD has a toll-free number to boot! What’s not to like? |
| Post removed |
| Post removed |
- 98 posts total