Dielectric grease on connection ends


I was changing a coil on one of my bikes earlier, and as always, applied a light film of dielectric grease on the coil outputs, and on the spark plug boots. A thought occurred to me that this may be a valid application in audio connections as well. A small amount applied with a cotton swab to bananas/spades/rca's etc. may help, and I'm thinking about giving it a go. Was wondering if this has been tried by any other members, and thoughts on the pro/con aspects.
128x128crazyeddy
Crazyeddy

Just go to Partsconnexions website in Ontario, Canada. They have a large range of DeOxit and a ton of other goodies.

Cheers DM
FWIW:

I tried the Sil-Clear in the past. Like others reported, it's messy at the very least.

I bought a very nice amplifier used on-line years ago. When I listened to it, it was unimpressive. I took the cover off and went in to clean connections. The upgraded fuses had a slight coating of this crap. I cleaned everything and the sound opened up. I called the previous owner to remark about it, he said, "I liked the sound that way".

slaw
FWIW:
I tried the Sil-Clear in the past. Like others reported, it’s messy at the very least.

I bought a very nice amplifier used on-line years ago. When I listened to it, it was unimpressive. I took the cover off and went in to clean connections. The upgraded fuses had a slight coating of this crap. I cleaned everything and the sound opened up. I called the previous owner to remark about it, he said, "I liked the sound that way".

My guess is the fuses were in the WRONG direction when you received the amplifier. After you cleaned the fuses you inadvertently reinserted them in the CORRECT direction. The previous owner was probably not into the whole fuse directionality thing.

"He had also screwed around with the bias as well."

bingo!